WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Master Power Window Switch 2002-08 Dodge Ram
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
1. Remove the old power window switch
Pry up the power window switch panel from the door pull.
Disconnect the wiring harness.
Remove the three Phillips screws securing the switch to the panel.
2. Install the new power window switch
Secure the new switch to the power window switch panel with your Phillips screwdriver and three screws.
Connect the wiring harness.
Clip the power window switch panel back into the door pull.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the master power window switch on this 2004 Dodge Ram Quad Cab, same as any '02 to '08 1500, in the '09 2500 and 3500. Tools you'll need are Phillip's screwdriver and a regular screwdriver. Replacing your power window switch is pretty easy but a lot of people don't feel comfortable prying stuff up but that's all you do. Pry this up, it comes up and out and then these harness connections, they have little tabs. You press on the tab and then you've got to work the connector free. Same thing here. Then there are three screws that hold the switch to the plate.
We'll fast forward here as we remove those three screws. This switch is working fine so I'll just show you how to reinstall it. It's just a reverse. It's real easy. Just going to fast forward again as I put those screws in. I usually start all three of them first and then tighten them up one by one afterwards. Plug in your harness connections and push it back down in. There you go and that procedure's the same for the passenger's side as well.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
901-303
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Awesome Parts and Service
J
April 23, 2019
Perfect match for my ford and super fast delivery. Many thanks
Customer Q&A
Will it work on the driver side?August 26, 2023
Mark H
10
No, this part is specific to the passenger side.
August 29, 2023
Jessica D
10
yes
September 2, 2023
Cristitito V
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.