Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
What's up, guys? I'm Andy from 1A Auto. In this video I'm going to show you how to replace the fuel pump relay on this 2012 Ford Escape. If your fuel pump's not working, this may be the culprit, but you want to make sure that you check the inertia switch or the fuel shut off switch before. If you this need this part or other parts for your vehicle, click the link in description and head over 1aauto.com.
Underneath the back of the vehicle, we have the vehicle raised up. Right above the rear axle is the fuel pump relay right here. To disconnect the connector, you just push down on the little tab and slide it down. I'm going to check and make sure there's no corrosion in that connector. If any of those connectors are green, then they need to be addressed. I'm going to take an eight millimeter socket and a ratchet, and take these two bolts out. I'm just going to hold the module while I take this other bolt up. Then slide the module off.
Here's the old fuel pump relay. Here's the new fuel pump relay from 1aauto.com. If you look at the mounting holes, they're in the same spot. The index pin is in the same spot. The shape is the same. The connector is the same. Get yours at 1aauto.com and you'd be ready to rock and roll.
Take the relay. Slide it up into position. Take the bolts. Get one started. Then I'll take a eight millimeter socket and ratchet. Tighten these down. Remember it is plastic so just snug, not too tight. I'll take the connector, line it up, lock it in place.
Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair. If you enjoy this video, please click the Subscribe button.
