Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 1999-2007 Ford F250 Super Duty
How To Replace Tail Light 1999-2007 Ford F-250
How To Replace Tail Light 1999-2007 Ford F-250
How to Replace Tail Light 1997-2003 Ford F-150
Created on:
Tools used
8mm Socket
Ratchet
1. Removing the Taillight Assembly
Remove the two 8mm bolts on the side of the taillight.
Pull the taillight down and out.
Twist the sockets out.
2. Replacing the Bulbs
Pull the bulb out.
Push the new bulb into place.
3. Replacing the Taillight Assembly
Twist the sockets into the new taillight assembly.
Line up the taillight and push it into place.
Replace the two 8mm bolts on the side of the taillight.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to remove and reinstall the taillight, whether you need to replace a broken taillight or you're just looking to replace a bulb. We're working here on a 2003 F250, same as any super duty truck of this era. The only tool you'll need is an 8mm wrench or socket with ratchet.
Okay, pretty straight forward. On the backside here there's two bolts that you need to remove. These bolts are 8mm. Speed it up here as I use an 8mm socket with a ratchet to remove those two bolts. Okay, once you have those bolts out pull down. The bulbs twist counterclockwise to disconnect. To service the bulb just pull it out, push it back in. The same up here. The new taillight from 1A Auto, if your taillight loses a battle with a 2x4 or fire wood, which happens on my truck a lot get a nice new light from 1A Auto. It goes right in. Everything goes right together. There are a couple line-up tabs. You just kind of want to get the bulbs in. Watch those line-up tabs. Get them in place.
Okay, we'll speed it up here as I put those two 8mm bolts back in. When you tighten them up you don't want to over tighten them, because you are just tightening speed screws into plastic, so make them firm but not too tight.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
10mm Socket
Ratchet
Tools used
10mm Socket
Ratchet
Tools used
Socket Extensions
Socket Driver
8mm Socket
Ratchet
FR263-U000R
In Stock
Product Reviews
Loading reviews
4.86/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
0
0
0
Ford replacement lights
Vic
February 17, 2017
Both the headlight &a tail light replacement parts were good. The only negative comment I have is that they did not come with mounting hardware, ie.the necessary screws & clips.
Tail Light Lense for My Truck
Charles
June 10, 2017
I purchased the lense, it was the correct one. It arrived as promised in a timely manner. The customer service was outstanding. I recommend this company and will use their services in the future. Good show all around!
C Brooks
El Paso, TX
Great Service
J
November 9, 2017
I am not a mechanic. If I have a problem with my vehicle under the hood I go to a qualified mechanic. However, there are times when I need the right part and instructions for how to replace it. 1-A Auto videos have helped me a great deal. However, it is the service that I have received that impresses me more. The service representative who helped me on this order was articulate, patient, and asked the right questions to help me clarify my exact need. She was excellent and would be the reason I would call again for any future automotive parts needs. I told my mechanic he should consider 1-A Auto If he needed major parts for future repairs. Thank you for your excellent service.
CORRECT PART
George
November 23, 2017
THE ITEM WAS DELIVERED ON TIME. THE PART FIT WITH NO PROBLEM. I WOULD BUY FROM 1A AUTO AGAIN. GREAT COMMUNICATION.
Shimmering lens
Douglas
October 5, 2018
It fit as if it was original equipment. Didnt expect anything less from 1Aauto. Now I wished that I had bought 2 cause now I have a shiny one and a dull one??
Douglas
March 26, 2019
Being a satisfied customer of 1aauto for the last 8 years
I have no complaints about there service, warranty and pricing. I always recommend 1aauto to anyone who needs
Parts or equipment for there vehicle. The quality of parts is excellent.
Stan
April 5, 2019
Exact fit, same as Ford factory, priced well
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.