Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How To Replace Headlights Bulbs 2007-13 Chevy Silverado
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
Needle nose pliers
1. Removing the Grille
Pry out the eight plastic clips from the trim panel using a flat blade screwdriver
Remove the four 10mm from the grille with the socket and ratchet
Disconnect the four grille clips with the needle nose pliers
Pull out the grille
2. Removing the Headlight
Remove the two 10mm bolts from the headlight bracket
Pull back the wheel well panel
Remove the 10mm bolt from the headlight bracket behind the wheel well panel
Pull the headlight out
Disconnect the headlight wiring harness
3. Replacing the Headlight Bulbs
This step is only necessary if you are replacing the headlight bulbs
Turn the base of the bulbs counterclockwise
Remove the old bulbs
Disconnect the wiring harnesses from the old bulbs
Connect the new bulb to the wiring harness
Insert the new bulbs
Turn the base of the new bulbs clockwise
4. Installing the New Headlight
Reconnect the wiring harness to the headlight
Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
Replace the three 10mm bolts into the headlight bracket
5. Reattaching the Grille
Push the grille tabs onto the clips
Replace the grille bolts
Put the trim panel into place
Lock the trim panel into place with the plastic clips
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the headlight on this 2011 Chevy Silverado 1500. It's the same process on the 2500s and 3500s between the years of 2008 and 2012. The only tools you'll need are a 10 millimeter socket and ratchet, pliers, and a flat blade screwdriver.
Remove the top trim panel. There are some clips and what you do is use your flat blade screwdriver to pry up in the middle of the clip. Once you get the middle up, the whole clip will come out. There are eight of these clips to remove. We'll fast forward, here, as we take those out.
Once the clips are out, you can just lift that panel and set it aside. You can see here there are four 10 millimeter bolts. You want to just go ahead and remove those. Down behind the grill, you'll see there are four of these clips. You just want to use pliers to push the clip together, and then you want to pull out on the grill to pull it free. You want to do that to all four of them. After all four of those clips are free, you just want to pull that grill out and off. Behind the headlight, you can see there's these two 10 millimeter bolts. You just want to remove those. If you come down here into the wheel well and you pull this inner panel back, you'll see there is one more 10 millimeter bolt right there securing that headlight. You just need to loosen that bolt up some.
With those three bolts out, you just want to pull that headlight out and turn it a little bit and it should come free. You'll see there's a harness here. All you'll want to do is . there's a tab at the top, push it in, and pull that harness out.
The new headlight's in the front, the old one in the back. You can see they're exactly the same. Same mounting points, same harnesses, everything. It's an exact replacement from 1A Auto.
If you're just looking to replace the bulbs, you just turn them counter clockwise, they unlock, and pull out. Then, you disconnect by lifting the tab up and pulling out. The new bulb will go on. Insert and turn clockwise to lock it. Same with the upper bulb. Then, there are two other bulbs, basically the same idea, twist counter clockwise. These just pull right out. Put a new bulb in, make sure it snaps in there completely, and put it in. Do the same thing for the upper one. Pull it out, new bulb, make sure it snaps in there completely.
To reconnect your headlight assembly, you just want to push that harness back in and line up these tabs with the holes on the truck. You just want to twist the light in and push it back into place. Let's fast forward, here, as he replaces those three 10 millimeter bolts that secure the headlight. To put the grill back on, you just want to line up the four tabs on the back and push it into place and it will lock on. We'll fast forward as he replaces those four 10 millimeter bolts along the top of the grill. Just put that panel back and replace those eight clips along the top by just pushing down the center to lock them. That's it.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GM438-B001R
In Stock
Product Reviews
Loading reviews
4.92/ 5.012
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
1
0
0
0
good product
donald r
February 2, 2017
no problems good product fast delivery just a pain to install but thats gmc fault
Headlight Assy
Thomas
February 13, 2017
This headlight assy was an exact fit. The construction is very strong and the price was great. The light matches the OEM one. I would buy this item again.
Very satisfied customer
T
February 3, 2018
I have ordered several items from 1Auto and I have had no problems. Good quality products, good customer service and good delivery.
headlights for GMC
D
February 13, 2018
I really do like my order, which was send out the very next day and I got it at post office box in last a week. Since then, my son-in-law replaced them. It was awesome....headlights really shine in the night; that I don't worried about traveling in darkness with very low lights.
Worked
rodney
June 18, 2018
Replaced passenger side headlight on 2011 Sierra SLT Part was a match to the broken one. Didn't price one from a dealer but I'm sure it would have been more.
Perfect fit
Philip
October 11, 2018
Headlight was exactly like the original, including all bulbs. I especially appreciated the how to video by A1. It turned the task into a simple job. I would recommend.
Excellent Experience
G
January 8, 2019
Normally I don't take the time to write reviews and get involved with them. I was highly impressed with 1A Auto, both with their helpful you tube instructional videos and well as the organized parts web site with it's ease of navigation. Headlight assembly's were great and even came with bulbs already installed. I was leaving on a trip in 2 days and the low beams in factory lamps had failed "wiring wise" joy; so I had these shipped over night. They arrived on time and got them installed and able to leave on time. Excellent experience and would highly recommend this company to anyone!!! Gary
truck headlight assy
Moritz
July 1, 2019
needed rf headlight for my 08 gmc part was delivered in a timely manner fit was correct and quality appears to be above average
Merle
October 1, 2019
Easy ordering and fast shipping has always been my experience with 1aauto. This assembly fit right in. It comes complete with bulbs, but not mounting bolts. It plugged into the headlight harness with no problem and everything worked.
Lawrence
September 9, 2021
Fits and looks identical to factory headlight arrived promptly, only time will tell if it leaks or fades but as of now its good.
BEN
March 4, 2022
GREAT LOOK AND FIT
THANKS Eagle Eye....Again
Milton
June 14, 2023
Perfect fit, looks OEM....this is not my first set of Eagle Eye replacement head lights and as always they fit perfect.....A++++, extremely satisfied.....THANKS Eagle Eye
Customer Q&A
What bulbs do you recommend using is this assembly???December 19, 2018
G E
10
New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, replace them with your original bulbs or with new bulbs.
December 19, 2018
Christa R
Why do you have the same video for both the driver and passenger sides?October 22, 2021
DerekO D
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.