Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
To replace your third brake light bulb or the housing start by removing these little end caps with small flat-bladed screwdriver. Just pop them off. Put them aside somewhere so you don't lose them. They're very small. There are two Phillips head screws behind here. Let's start by removing those. If you can't get them out, that's okay. That is loose now. Take my fingers and pull it out of the spoiler. At the same time, I'm going to flip it like this with both hands. Get the screws out into my hands. Put the screws aside so I don't lose them.
You can see here, this is where your bulb is. Turn it counterclockwise to unlock it. There's a 921 bulb. You need to replace it. You can pull it straight out of the socket. Putting a new one in. It can go in any direction. It's not going to bother it.
Take our new third brake light. Install the bulb and socket or if you're just changing the bulb, you can reuse your old one. Find the right locking tabs. There's a wide one here and a narrow one here, and the corresponding holes on the light assembly. There we go. Now we turn it clockwise. Lock it in.
Find the spot for the wires. Slide it back in to the spoiler. Hold it in place with my fingers. One screw started in there, Phillips head. Just going to go until it feels tight. Place our little triangle trim pieces. The third brake light is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
