Replaces
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hi, everyone. Sue here at 1A Auto, and today, on our '07 Mazda 6 sedan, we're removing and replacing the blower motor. If you need any parts for your car, click on the link below and head on over to 1AAuto.com.
The blower motor is located on the passenger side under the glove box. To remove the blower motor, it's down here on the passenger side floor right under the glove box, so the first thing we're going to do is disconnect the electrical connector, which is in the back here. There's a tab. You're going to push on that tab, and then pull down on the connector. We're going to remove the electrical connector. Push in on this tab and pull down. Simply wiggle it out. There's your connector. Move that aside.
You're going to have four mounting bolts. They're 6mm socket size. I'm just going to pull those right out of the plastic. Just undo them. I'm going to hold out the blower motor with my right hand and take that last screw out.
Now, you want to be careful of any debris that might fall out, and there's your acorns. I'm just going to drop it on the floor. Make sure you get it all out.
We're going to reverse process to hook it back up, replace it. You can start them by hand. I'm going to put two in across from each other so it will hold this blower motor up so I have both free hands. The last two, then we'll hook up the last of the blower motor connector. Then I'm going to hook up the clip that came out. Pop that in place, then I'm going to reconnect my electrical blower connector.
That's it. You're all done. Vacuum your floor. You're ready to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
