Replaces
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we show you how to replace the exterior door handle on this 2004 Nissan Titan, and we show you on the driver side door, but the passenger side is the same procedure. The items you'll need are a new exterior door handle from 1AAuto.com and a T30 Torx driver.
Start off by pulling out this rubber cap on the inside of your door and then remove that T30 Torx bolt. I'll just fast-forward as Don does that. Open your door handle and then push the lock bezel forward and out, and then, just pull out your lock. You want to pull it back enough so that you have enough room to slide your door handle back. Once you slide the door handle back, the front end will come out and then you can pull it back and up.
Up front is the old door handle and the back is new one from 1AAuto. You can see it's identical and it's going to fit exactly the same. Pull back on your lock, push the back into the door handle in, then slide it forward, push the front end in and then slide it forward the rest of the way, and then push your lock back in. Now replace that T30 Torx bolt and just put it on the end of your driver or Torx bit, fit it into place and tighten it up and then replace that rubber cap. Now on your lock bezel there's a tab that you need to push onto the lock, so pull back on your door handle, push the bezel in and then slide it back and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
