Kit Includes: (1) Passenger Side Fog Light (1) Driver Side Fog Light
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace FogDriving Light 2001-07 Toyota Sequoia
How to Replace Fog Light 2001-07 Toyota Sequoia
How to Replace Fog Lights 2002-2006 Toyota Tundra
Created on:
Tools used
Flat Blade Screwdriver
10mm Wrench
10mm Socket
Slip-Joint Pliers
Ratchet
1. Servicing the Fog Light Bulb
Remove the three 10mm bolts from the fog light shroud
Twist the fog light bulb socket out of the fog light
Pull the bulb out of the socket
Push the new bulb into the socket
If you are servicing the bulbs alone, twist the bulb socket into the fog light
If you are replacing the entire fog light assembly, continue to Step 2
2. Removing the Fog Light
Pry out the fog light tabs with a flat blade screwdriver
Undo the fog light clip with pliers
Pull the fog light out from the front of the bumper
3. Installing the New Fog Light
Set the adjuster to the same distance as on the old fog light by hand
Push the new fog light into place from the front of the bumper
Twist the bulb socket into the fog light
Adjust the fog light aim as necessary with a flat blade screwdriver
Push the fog light shroud into place
Insert the three 10mm bolts into the shroud
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a fog light, both if you just need to replace a bulb, as well as, if one of your fog lights gets broken. You can purchase a new one from 1AAuto.com and replace it. The tools you'll need are a 10 millimeter wrench or socket and ratchet. You'll need a regular flat blade screwdriver, and you'll need a pair of pliers.
We're looking up from the bottom side in front of the front tire. There are three bolts in this little plastic shroud we're going to remove. They're 10 millimeter. We'll fast forward here as we remove those three bolts. Once you remove those bolts, then that can pull out of your way. Right here at the back of the fog light, if you're just in here to change the bulb, you turn this counterclockwise, pull it out. There's your bulb. Then your bulb just disconnects. Press a tab here. Pull the bulb out. Keep that out for now. I'm just going to put the bulb back in for safe keeping.
If you need to replace your whole assembly, because it's been broken, it's held in right up here you can see there's a tab sticking through the bumper cover. There's one on this side and there's one on this side. Then there's also your adjustor holding it here. What you want to do is, and you can see when I put this in here, you'll pry the side out, which allows this to release. First, you want to do that for the other side, which I really can't film, but I'll pry out and push on my light. Until that releases, and then I'll pry out on this side, push and it's released. Now, take just a regular pair of pliers and you'll want to grab on. There's basically little teeth that lock this clip in place. Grab onto those, push them through. Now, your whole light comes right out.
Here's your new light from 1A Auto. You can see it's really nice and clear compared to the old one. Obviously, if your old one's broken you're going to need a new one. One thing you'll want to do, before you put it in, is set the adjustor. Just look at your old one. Let's have it the right way here. Basically, just set the distance between here and here the same on your new one, as your old one. It's just a matter of turning the adjustor in by hand. Go a little more. That gives you a good preliminary aim. Then, the new one is just as easy. This is on the bottom. Slide it right in. Make sure everything comes through and is lined up properly. Then, just push it into place. It's locked in. Connect our harness. If you did want to aim it better, you can get a little screwdriver in here and turning it one way aims it down, the other way aims it up. Usually if you set it preliminarily, it's going to be pretty good. You want to make sure that you pull this over and it goes back up correctly there. Start your bolts in. Fast forward as I start those bolts in. First, I start them by hand, and then tighten them up nice and firm with a 10 millimeter socket and ratchet.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Socket Driver
Phillips Head Screwdriver
Bungee Cord
10mm Socket
Trim Tool Set
Tools used
Gloves
Flat Blade Screwdriver
Jack Stands
Wheel Chocks
10mm Socket
Ratchet
Floor Jack
Safety Glasses
LHT00881
In Stock
Product Reviews
Loading reviews
4.27/ 5.011
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
0
0
0
2
Snapped Right in Place.
Randall
February 12, 2017
Removed covers and the driving lights poped right in. Replaced the bulbs that came with the lights with some brighter bulbs. A big improvement over just head lights. After adjusting the height, they light up the road and increased visibility on the sidewalk as well.
Headlights and Fog lghts
Eric
April 28, 2018
First I would like to speak on the customer service of 1 a auto. They give friendly customer service to their customers. As for the headlights and fog lights, they both are satisfactory product. Affordable and quality parts for your vehicle. 1 a auto is the #1place to shop my auto parts.
Eric.
Christopher
May 10, 2018
Snapped right in place.
Perfect fit.
Had both lights changed in 20 minutes.
Saved a couple hundred bucks.
2006 Toyota Tundra Fog Lights
Richard
September 17, 2020
A+ replacement for OEM. Highly recommend!!
2002 Toyota Sequoia fog lights
Doug
February 5, 2021
Great quality and super easy install. The left light harness clip housing came broken due to shipping. However super glue fixed it. You are welcome A-1. More packaging around the clip area.
Replaced these at the same time as replacing the headlight assemblies. Received Eagle Eyes brand. They are 95% as good as OEM at a much lower price. They are easy to install and adjust. I adjusted these to match the OEM assemblies and they project light great. You wont regret buying these.
New lights
Jamie
April 21, 2022
The new lamps work great are much brighter and my 2004 Sequoia looks brand new again.
Condensation
[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/71c2c1cc8225e00cbc0233926064dcd5_1650935523873_0.jpeg", "caption": "Condensation inside brand new fog light"}]
Ryan
April 25, 2022
Condensation after a light rainstorm. Customer service supervisor stated that condensation inside fog lights is normal and would not honor their warranty on these defective fog lights. Low quality product.
Not impressed !!
Deanna
May 8, 2022
I purchased these along with the headlights.
These were easy to install.
However, with these and headlights; I couldnt see the road at all driving home from Bucks game in light rain. I even had them professionally adjusted. I sure wish I wouldnt have thrown out old ones !!
In my opinion, vehicle lights these days are a real safety hazard !!!
Toyota tundra 2 piece fog lamps
Elias
July 5, 2022
Fof lights were a perfect fit and easy to install.
Great Fit!
Christopher
December 25, 2023
Lights fit great! Looks so good to have clear lights back on my 2003 Sequoia!
Customer Q&A
Are these fog light housings CAPA certified?January 12, 2019
Daniel W
10
These lights are not CAPA certified. They are DOT and SAE approved. Thanks!
January 12, 2019
Adam G
10
I am not sure but they work great and easy to install
Robert
January 15, 2019
R H
My SR5 does not have these lights. Can these be easily installed in the blanked spaces in the bumper?July 2, 2021
Jim Moore J
10
Hello this is a kit to replace existing fog lights you would have to locate and upgrade kit with the wiring and switch to turn them on.
July 3, 2021
Ricale A
10
The wiring may be there some vehicles come prewired for an option but you will have to have the basket the lights mount into
July 3, 2021
Dale W
I have an SR5 with blanked space, will these lights work? i have prewire on my truck also or do i need to buy a kit to be able to turn them on?December 11, 2022
Juan M
10
These are direct replacements for vehicles that are already equipped with fog lights. This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
December 13, 2022
Kelly S
Will these fit a 2006 Tundra with a steel bumper? I currently dont have fog lights, just the openings with plastic inserts.December 13, 2023
James P
10
Yes, this part will fit your 2006 Toyota Tundra.
December 13, 2023
Jean O
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.