TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Mirror 1993-97 Toyota Corolla
Created on:
Tools used
10mm Socket
Ratchet
Needle nose pliers
1. Removing the Side Mirror
Pull the triangle trim panel at the top of the door panel off.
Remove the three 10mm bolts securing the mirror.
Pinch the clip with pliers and pull the mirror out and off.
2. Replacing the Side Mirror
Line up the mirror and push it into place.
Replace the three 10mm bolts.
Push the triangle panel back into place.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
In this video, we're going to show you outside rear view mirror replacement on this '94 Corolla. It's pretty easy. The only tool you'll need is a 10mm socket and ratchet or a wrench.
To replace the mirror, this trim panel, just grab it with your hand, pull it off. Then there's three 10mm bolts right here. Use a 10 socket with a ratchet and extension. We'll speed it up here as we remove those three 10mm bolts. You could use a 10mm wrench here as well as the socket and ratchet.
Just pull it out with a pair of pliers. Pinch this clip here. Pull it right off. Okay. You could see our rear view mirror is in fine shape. New mirrors from 1A Auto are all the same. Exactly the same. They come molded in black plastic and they'll bolt on just like the new ones. Put it back on. It's just the reverse of the procedure. We'll speed it up here again as we put those three bolts back in. It is really quite a simple procedure. Just take that panel off and three millimeter bolts.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
MRA08722
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.