Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the front bumper-mounted parking light on this '99 Toyota 4Runner. It's the same as any '96 to '02. You'll need a Phillips screwdriver and a flat blade screwdriver.
To service these bumper-mounted parking lights, if you're just looking to change a bulb, you just have to come up and reach up underneath. Right here is the socket. Turn it counterclockwise and pull it out. Okay, there's the bulb. It usually pulls right out of the socket.
Put your replacement one in. Put it back in and turn it clockwise to lock. If you need to replace the entire assembly, you're going to have to remove these two Phillips screws first. We'll just speed it up here as we use a Phillips screwdriver to remove those two screws. Once you get the screws out of the clips, then the light comes right out.
Once you get these screws out, then these little clips, you see the screwdriver. Push up and out. Then push down and out and these clips come out.
The new light from 1A Auto comes with the clips already installed. Put it in place. Get one clip through and make sure both the clips are coming through. Push it in until it locks. If you have a little trouble getting it to lock in place, just take your screwdriver, press on the back of the fascia, push in, and it'll lock. Then connect that there and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
