Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tail lamp assembly. We're going to show you how to . if you're just looking to change bulbs, we'll show you how to do that as well as if you have a broken tail light you can get a new one from 1AAuto.com. In addition to that new tail light, you'll also need a 10mm socket and ratchet.
Open your tailgate, pull back the bed liner if you have it, which will expose two 10mm bolts. I'm using a 10mm socket and socket wrench to remove the two 10mm bolts. I'll fast forward as I do that. Pull the tail lamp assembly out.
All three of the tail lamp bulbs come out the same. They're twist lock, so you twist them counterclockwise, pull the socket and then just pull the bulbs directly out. In order to reinstall them, you're going to line up the tabs and twist it clockwise. You're going to go ahead and do that for all three of them. If you're replacing the tail lamp assembly, remove the three sockets and place them down in order to be put back in.
Here, you can see the old part and then the new part from 1A Auto. It's a direct replacement fit part with the exact mounting locations and new plastic lenses. Line up the tabs on the sockets and lens and twist them clockwise to lock them in place. Once you've done that, you can place the tail lamp assembly back in. Note the pins, the guide pins that I'm going to show you right here, and where they go into the frame of the left rear fender. Reinstall your 10mm bolts and I'll go ahead and fast forward as I tighten those up. Put that corner of the bed liner back in place. Then you can go ahead and put your tailgate back up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
