Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Mirror Memory Type: Without Memory
Adjustment Type: Electric
Specification
Side Location
Driver & Passenger Side
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Side View Mirrors 2000-07 Chevy Monte Carlo
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
Phillips Head Screwdriver
Putty Knife
10mm Socket
Ratchet
T25 Torx Driver
1. Removing the Door Panel
Remove the Phillips head screw at the front top corner of the door panel
Remove the Phillips head screw inside the door handle
Remove the two T25 Torx screws under the pull handle
Pry off the trim piece inside the door handle with a flat blade screwdriver
Pry off the door lock switch while pulling up with a flat blade screwdriver
Slide a putty knife into the side of the door panel and pry out on the clip
Pull out sharply to release the clips around the door panel
Lift the door panel up and pull it back
Pull the speaker and switch panel harnesses free
2. Removing the Side Mirror
Disconnect the side mirror harness
Remove the insulation
Remove the 10mm bolts from the side mirror
Pull the mirror out
3. Installing the New Side Mirror
Feed the harness of the new mirror through
Line up the mirror's studs and push those through
Replace and tighten the 10mm nuts on the side mirror
Put the insulation into the door
Reconnect the mirror harness
4. Reinstalling the Door Panel
Reconnect the speaker harness and switch pack harnesses
Put the door panel down into the window sill
Lineup and re-clip the door panel
Reconnect the door lock switch into the door handle panel
Replace the trim piece inside the door handle
Tighten the Phillips head screw at the front top corner of the door panel
Tighten the Phillips head screw inside the door handle
Tighten the two T25 Torx screws under the pull handle
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side mirror on this 2003 Chevy Monte Carlo. It's the same part and similar process on the Monte Carlos from 2000 to 2007. We show you on the driver's side but the passenger's side is the same procedure. The items you'll need for this is a new window regulator from 1AAuto.com, a flat blade screwdriver, a Phillips screwdriver, a T25 Torx driver, a putty knife, a 10mm socket, and a ratchet.
Your door panel is held on with four screws. There's a Phillips screw here and a Phillips screw up here. Then down here, onto the pole handle, there are two T25 Torx screws. We'll just fast-forward as Mike removes those. Pry out, behind this panel, the flat blade screwdriver, and then slide the panel forward and over the door handle. Then pry out on both sides of your door lock switch while pulling up on it. It should pull free.
There's an indent right here that you want to slide your putty knife into. Then just pry out on the clip. Then reach back behind the door panel and feel for the clips. Just pull out sharply to release the clips. Once you've released them all the way around, just lift the door panel up, and then pull it back. Now push the tab on this harness and pull it free. Do the same thing for this harness. There, your door panel is free.
There's an indent right here that you want to slide your putty knife into, and then just pry out on the clip. Then reach back behind the door panel and feel for the clips, and just pull out sharply to release the clips. Once you've release them all the way around, just lift the door panel up and then pull it back. Push the tab on this harness and pull it free. Do the same thing for this harness. Your door panel is free.
Push the tab on this harness and disconnect it. Then pull out this insulation. Now, you want to remove these three 10mm nuts. We'll just fast-forward as Mike does that. Now, pull the mirror free.
On the left is the old mirror; on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Take your new mirror and feed the harness through. Then line up the studs and just push those through. We'll fast-forward as Mike replaces those 10mm nuts and tightens them up. Put the insulation back into the door and reconnect your harness.
To reconnect your door panel, just start off by reconnecting these two harnesses. Just put this switch through here, and then line up these slots with these four tabs. Just lift the door panel up, and push those slots onto the tabs. Then just make sure the clips are wind up, and hit them into place around the sides of the door panel. Push your door lock switch back into this panel. Slide the panel over your interior door handle and slide it back into place. Then just replace those four screws, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA09214
In Stock
Product Reviews
Loading reviews
5.00/ 5.05
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Great product!
Greg
July 6, 2017
I am VERY pleased with my purchase. They look fabulous and perform just as the OEM does for 300 dollars less! I will be back!
Fits good and looks great
Mida
April 1, 2018
Mirrors are great looking. Looks as if they was put on when car was sold. Nice shunning black. Look forward to shopping here again. Would recommend this to anyone
2004 Monte Carlo LS
S
April 23, 2018
My purchase of the pair of Chevy Monte Carlo Mirror Pair was the exact fit and i do not have no complaints . Keep the good job up. I will always recommend 1A Auto,and return to purchase more parts.
These were half the cost of one official GM replacement mirror but for a pair. My car is black and they were a black molded plastic so I didnt need to paint them. Installing them was pretty simple.
Richard
March 27, 2022
Just as you said fit perfectly and the color was an exact match thanks Rick H
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.