Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace and service your third brake light on this 2005 Ford Focus. The only tool that you're going to need for this is a flat blade screwdriver.
Open up your trunk and on the back of your third brake light you'll see these two clips. Using a flat blade screwdriver pry out the center and pull it free. Then pull out the bottom part and that third brake light should pop free. Now, you want to disconnect this harness. Push the tab and pull it free.
To access your bulbs, you want to push in on these metal tabs and pull up on the plastic part. Do the same thing on this side, and for any bulbs left behind just pull them out and push them back into place. If you want to replace a bulb you just pull it out, push the new one in and then line up this light bracket and push it back into the third brake light assembly. Making sure all those tabs are reconnected, replace your harness. Push the third brake light back up in place and replace the bottom part of the clip and then the center. Do the same thing on the other side and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
