Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike from 1A Auto. I hope this how to video helps you out and next time you need parts for your vehicle think of 1AAuto.com. Thanks.
In this video we are going to show you have to service the taillights on this 2001 Toyota Sequoia. It's exactly the same for 01 to 04. The 05 to 07 the process is the same even though the taillights look a little different. The tools you will need are a Phillips screwdriver and a 10 mm socket with a ratchet and an extension helps out a little bit too. It's a pretty easy process. We show you both just changing the bulb as well as if you need to change out the whole taillight assembly and harness.
On these taillights there are two 10 mm bolts to remove. One here and one here. I suggest a 10 mm socket with a ratchet. The extension is optional. Once you have that off you kind of shake it around a little bit and the lights pull right out the side. If you are just looking to change a bulb you just any one of these sockets you just turn counter clockwise, pull them out, the bulbs pull out, back in and then get them into the right position and lock.
If you're looking at changing the entire assembly you can either just switch out the bulbs and the harnesses and put the new assembly from 1A Auto in or if you want to change the entire harness and everything, sometimes this is necessary because sometimes the sockets get corroded. The next step would be to remove the six screws that hold the sill plate down in the back which I'm fast forwarding through here. This is a 10 mm bolt here to remove. Then on these plugs you grab the outer edge and pull and they come out. Now you can pull out on this panel. Once you get in here you press right on this part of the connection and then pull it apart. As you pull it apart this comes out.
New taillight from 1A Auto. See it's just like the original. Now if you've broken your taillight or whatever it's going to go and fix your problem. What you'll want to do is put your harness in and then put this plug in. You just kind of force it into the whole and lock in place. Put the light in place. Hit it on the side. Reach in here and feel the plug and turn it 180 degrees then plug the light in. Put that back in. Push our little clips back in. Speed it up here as we put the trim back together. Those plugs obviously go in. The 10 mm bolt that holds the top with a little shift. Put the silt plate back down. It snaps in first and then put the six screws in to place. Back here push your taillight over a little bit to put these bolts in.
We hope this helps you out. It was brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company here for you on the internet and in person.
