Replaces
Frequently bought together
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to remove and reinstall the front grille on this 2002 Toyota Tacoma. It's pretty easy process, the only tools you'll need are a Phillips screwdriver and a long flat blade screwdriver.
With your the hood open, there's a Phillips screw right here on top. We're going to remove that. Once that's removed, you can pull your light. Pull this up. Pull your parking light forward and then reach in behind and just twist counter clockwise on the socket. You want to repeat removing that side marker from the other side of the vehicle as well.
Now, below the headlight, just reach in and pull firmly. Then these clips, you actually . these two came apart. You just reach down in, and there's a tab right here. You press on that tab and that releases each clip. Release those ones first and there's three down below, so you need a long screwdriver. There's one way down in here. Pull from the bottom, here, and then reach way down in here, and grab that tab. Pull the one in the middle. Grab that and pull. Then the third one over here was already let go and there's your grill off.
For reinstallation, it's going to be pretty simple. Make sure it goes in, underneath, and you push that side in. Push the opposite side in. Then, make sure your tabs line up in here. Make sure the lower ones go in. Give it a good extra push. Make sure it's locked in there.
Line in these two tabs. There's one up here and one down here that goes into the grill. Make sure that lower one goes in. Make sure this goes underneath. Make sure that one's going in, push it in, lock it right in. Make sure you can see the hole in the headlight and put your screw in. You repeat this from the other side, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
