Replaces
Frequently bought together
Part Details
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going show you how to service the bulb as well as replace the rear side marker light on this 2003 Mercury Mountaineer. We'll show you on the passenger side but the driver side is the same procedure. The only tool you'll need for this is a 10 millimeter socket and ratchet.
Reach up behind the side marker light and just twist your socket out counterclockwise and then pull the bulb free. Take your new bulb, push it into place and then you would just twist that socket back in clockwise to lock it.
If you're going to remove the assembly, there are two 10 millimeter nuts up there. You can just go ahead and remove those. Now, just push from the back of the side marker light and pull it free.
Then push your socket through. Take your new side marker light and twist the bulb in clockwise to lock it. Then push the side marker light back into place. Once you have it pushed in, just feed those 10 millimeter nuts up there and just twist them on by hand to get them started. Then just tighten them up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
