Replaces
Part Details
Product Features
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
Hi, this is Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a manual mirror on this 2005 Chevy Cobalt, same as any '05 to 2010 Cobalt with the manual mirrors. Only tool you'll need is a flat blade screwdriver and a 10mm wrench.
First, with a screwdriver carefully pry the top slowly out and kind of come down further and pull straight out on this panel. Three nuts hold the mirror on. You just see, one and two. The third one is right down in there. Use a 10mm wrench. Go right in here. Once you pretty much have it started, just use my finger. Okay. Reach with my both fingers, unscrew it. Pull it right out. Okay, then remove the other two. Just fast forward here as we remove those other two nuts.
You just basically press in on a few tabs. Let me show you that again here. Push it through. There's a tab right up here, there's a tab over here. Press those tabs and it pushes right through. Here's your mirror out. Reinstallation or installation of the new mirror. Just the reverse of the procedure. Put the control through. Then put it in the right position, pull it through. Make sure all the tabs are pushed through. Okay. Now, just get the mirror in the right position. It clips in place. Start these two nuts first. This one. Carefully as I put my fingers right in there. Basically hand it to my fingers and start it on. Be careful not to drop it down into the door. Use the wrench to tighten it up. Make sure this goes on. Make sure it's in on all the slots. Make sure it's all through. Push the bottom on.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serve you on the internet and in person.
MRA05503
