Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
Hi, I'm Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com.
In this video, we're going to show you how to service the rear inside taillights. That's the one that's mounted to the trunk lid or the or the deck lid. We're going to show you both changing the bulbs. If all you're doing is changing bulbs, you don't need any tools. If you do need to replace the taillight itself because it's been broken, you'll need an 8mm wrench or socket and ratchet.
Open up the trunk. In servicing the bulb, it's really pretty easy. They're right here. This is the backup light bulb. Just twist counterclockwise. Pull it down, the bulb comes out. The bulb just pulls from its socket. Put it back up in, lock it. This one here, the same thing. Counterclockwise, bring it down the, bulb pulls out. Push it back in.
If you need to replace the entire assembly because you got into the lock center or something, you'll need an 8mm wrench or socket and ratchet. I prefer to go to the socket and ratchet method, there's two bolts here or two nuts and one right up in here. Generally, once you get these things started, it comes right off by hand. Now, just fast forward here as I remove those three nuts. It does kind of figure, one of them is so stubborn I have to use the socket and ratchet for most of it.
It comes up and off. Obviously my original's in fine shape so I'm going to reinstall it. One from 1A Auto fit in just like the original, they come with the gasket and everything. Put it back in. okay, I'll start with the nuts. Just fast forward here. Again, like I said, I'll start the three nuts on there first. Then when you tighten them up, you tighten them up till they're seated and then just tighten them up till about a quarter turn more. Bulbs up in. Find a place, turn clockwise to lock.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
