Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2010-16 Cadillac SRX
How to Replace Tail Light 2010-2016 Cadillac SRX
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
Pry up the trim button from the tail light trim and remove it
Remove the trim from the tail light
Remove the Phillips screws from the tail light
Pry out the tail light
Press the connector and remove the wiring harnesses
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
Reverse light bulb is HPC16w
Bulb is a w21w
3. Installing the Tail Light
Insert the tail light into place
Tighten the Phillips screws to the tail light
Tighten the Phillips screws to the tail light
Press the trim to the tail light
Press the trim clip to the trim
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
I'm going to open the lift gate, just grab underneath here, push the button, and it will automatically open. We're going to pull this trim piece off right here. We’re going to need to remove this clip. We’re going to use a trim piece tool to remove it. A little spot on the top get underneath here, pry up, and once it's out a little then that comes out completely. And we can grab this trim, bring it straight forward, and it pops right off, some clips in there.
We're going to take these Phillips head screws out: there's two right there, just use a Phillips head screwdriver pull those out. We're going to grab the tail light and grab underneath here the side. Pull it straight back. It might fight you a little bit. These little pieces go into these little slots.
To disconnect the wires, you’re going to push this connector right here down on the lock and pull it out. A little lock right here, push that down, and pull that one out. Then the bottom one the wiring harness is held in by this clip, pull that off, and then right here push this connector down. There’s a lock right at the top. Slide that out.
All right, we're going to remove this reverse light bulb. Just grab it, twist it to the left, and pull it out. This bulb is an HPC 16W. We'll remove this bulb, turn it to the left, and pull it out. You can grab the bulb from the socket and firmly pull it straight out. This bulb is a W21W.
To reinstall, we'll line it up with the slot, lock it in, and we'll reinstall it in the taillight assembly. We're going to line this bigger slot up with this slot right here and then turn it to the right. To install the bulb you're going to line the tabs up right here with the holes, the slot in the assembly, push it all the way down, and turn it to the right, lock it in.
Now we're going to connect the connectors. Take this connector and line it up, push it in, lock it in, and then this retainer that holds the wire, slide that on just like that. Take this green connector, line it up, lock it in, and then this connector will go way up here and lock it in make sure it's in there good.
We're going to line these tabs up with the holes in the body. Get those lined up good, and then firmly push the taillight on. Now we'll install our Phillips head screws with our Phillips head screwdriver. Get that one started and go down here. Start this one and we can snug it down. Not too tight it is in plastic so just snug.
All right we're going to align these little clips up with these holes on this trim piece and then push it on and lock it in. Get it underneath the weatherstripping right there and then we have this little clip, position that and then push it down. Then we'll close the lift gate.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Phillips Head Screwdriver
Trim Tool Set
GM612-B000R
In Stock
Product Reviews
Loading reviews
4.90/ 5.010
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
0
Delivered on Commitment
P
June 26, 2017
Prompt delivery on exactly what I ordered and it works perfectly. Also, the price was very reasonable.
Thank You,
Paul R.
Fits perfect
K
June 28, 2017
Removing and replacing light took about 10 minutes. Matches perfectly
Easy
don
October 26, 2017
Unlock the earlier models of the SRX the 2012 was very easy to install 1 plastic rivet came off to expose the Rubber and two screws that was it fast delivery
Easy Order, Fast Delivery, Installation Easy
Kelly
November 3, 2017
The replacement tail light for my 2013 Cadillac was easy to order on your website. Delivery was fast. Installation was easy and it was a perfect fit.
L
August 30, 2018
First and foremost, I was a little skeptical about the tail light online, but after speaking directly with someone customer service she assured me that I was in fact purchasing the correct part and would fit my vehicle. Second, right after I made my purchase, I received an email confirmation.Third, I received confirmation information of shipment along with delivery date. Fourth, I received my tail light and I was super happy. Finally, I told as many people as I could about your company, customer service and encouraged them to order from your company if they needed any auto parts in the future. Signed satisfied customer.
Cadillac right rear taililight
Jeff
December 30, 2018
Great jpb. It is working great. The police had stopped my wife the night earlier and we really needed to make him believe we really had it on the way.
Got it in and put it right in, fit was dead one.
Shipping, service and product was exactly as needed.
Will be ordering more things from 1A Auto in 2019
Thanks
Jeff Myrtle Beach
East Coast Lock & Key
Looks like it grew there
Dennis
March 25, 2019
Website was a breeze to navagate, shipping was fast and on time . Light came well packaged and was simple to install and as the title states when all was said and done it looks like it grew there
my new car shopping place
R
August 8, 2019
received the part I needed fast and , reasonably priced unlike another parts store that sold me the wrong part that I had to return wished I would have shopped with 1A auto first
Taillight assembly
M
August 22, 2019
Ordering my taillight was easy on their website and tracking the progress was also easy. Product arrived well packaged and with no damage.
SRX Tailight
John
August 14, 2021
it looked great. the only problem was the socket for the lowest light was not formed well. I had to use a knife to cut the notches out so i could put the light socket in.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Cadillac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Cadillac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.