Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2014-19 Toyota Tundra
Created on:
Tools used
Socket Extensions
T30 Driver
Ratchet
1. Removing the Tail Light
Remove the two T30 Torx bolts from the tail light
Pull the tail light straight out
Pull the harnesses out of the clips
Disconnect the wiring harnesses
2. Installing the Tail Light
Connect the wiring harnesses
Press the tail light into place
Tighten the two T30 Torx bolts
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tail gate. To remove the tail lamp assembly, there's a T30 Torx bolt here and a T30 Torx bolt here. Using a torn bit and a ratchet, remove them. Let's pull it straight out. Pulling it off of these two pins here. To remove the tail lamp assembly. Push the harness out of this connector here. Just unplug these connectors, pushing in the locks to unlock them. Do the same for all three. Take the assembly off.
Here's the original tail light assembly pulled from our vehicle. Here's our brand new one from 1aauto.com. It is an exact match from the original. It will fit great and work great in your vehicle.
Reinstall it. Plug all our harnesses back on. They'll click when they lock into place. Push this back in. And these two tabs is going to go on the lower part. One will go on the upper one. Get them lined up. Push them in. Reinstall our bolts. Tighten them up. This procedure will be identical for the other side. It gets tight. Just stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
81560-0C101
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.