All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Blower Motor Resistor 1982-92 Chevy Camaro
Created on:
Tools used
Socket Extensions
7mm Wrench
7mm Socket
Ratchet
1. Removing the Blower Motor Resistor
Disconnect the blower motor resistor wiring harness
Remove the two 7mm bolts from the resistor
Pull out the blower motor resistor
2. Installing the New Blower Motor Resistor
Put the new resistor into place
Insert the two 7mm bolts into the resistor
Connect the resistor wiring harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to replace the blower motor resistor. Usually you know if this is bad when your fan will work on some speeds, and this is you're A/C and heater fan. It'll work maybe on low and 2, but it doesn't work on 3 or 4, or vice versa. That's usually the sign that your blower motor resistor needs to be replaced. The only tool you'll need is a 7mm socket and ratchet with extension as well as a 7mm wrench.
On the passenger side of the engine compartment, the blower motor resistor is right here. Once it's unplugged, it's just two 7mm bolts. I'm going to start this one with a smaller wrench since this harness kind of makes it tough to get a socket on it, to get anything on it, really. Your resistor comes up and out.
Here's our old resistor and the new resistor from 1A Auto. You can see it's all the same. Fix that problem with your fan not having all its speeds. Hook this harness up. Put it down in. Take this one first.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HCA40101
In Stock
Product Reviews
Loading reviews
3.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
Fixing blower motor fan speed
Allan
September 4, 2018
My review is blower works on high but not medium or low. Changed to new resistor and problem still exists
Customer Q&A
Thanks for your help guys . Can you please give me a estimate on when the blower motor resistor for my 89 s10 w will be back in stock?February 9, 2022
Thomas I
10
We except this part to be available around Feb. 16. Please keep in mind this is an estimate.
February 9, 2022
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Cadillac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Cadillac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.