Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
What's up guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the hood struts on this 2001 BMW 325xi. If you need these parts or other parts for your vehicle, click the link in the description and head over to 1AAuto.com.
Now, you don't have to take this off. I'm taking this off to make it easier to see in the video, a little weather strip right here, and there's a push clip right here, and try to take a trim tool. We actually sell this trim tool at 1AAuto.com. Slide this out and get behind here. Slide that out. We can grab this, just slide it up, take it out of your way. Like I said, you don't have to take that off, but it makes it easier to see on video. And then, you can take a little screwdriver or even a pick tool, slide this in behind here. There's a little spring clip, if you get behind it, you can pry it out a little bit. You're going to want to support the hood while you do this, so either have a friend do it or just try to support it with your back or something, or your shoulder. Slide this out. Get up here, slide that out, and pull that out.
Here's the old part. Here's the new hood strut from 1AAuto.com. As you can see, the length is the same. It has the same configuration, same mounting positions. Get yours at 1AAuto.com and you can do it yourself.
So, yes, support the hood. Have someone help you out, if you need to. And, just slide this over here. And then, lift it up a little bit and slide the bottom part on. Lock it in place. You can do the same on the other side. All right. Take this piece, slide this in position. With that lined up, then we're going to stick this push pin back in. And, push this retainer side of the push pin, get that started. Looks good. Take the weather strip, slide that back on.
Thanks for watching. Visit 1AAuto.com for quality auto parts, shipped to your door, the place for DIY auto repair. And, if you enjoyed this video, please click the subscribe button.
