WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Secondary Air Injection Pump Hose 2001-05 BMW 325Xi
Created on:
Tools used
Flat Blade Screwdriver
Pick
1. Removing the Secondary Air Injection Pump Hose
Loosen the worm clamps on both ends of the hose
Pull the hose off the fitting at leach end, using a pick tool to loosen the hose, if necessary
2. Installing the Secondary Air Injection Pump Hose
Slide each end of the hose onto the corresponding fitting
Tighten the worm clamp on each end of the hose
What's up guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the secondary air injection pump hose on this 2001 BMW 325xi. If you need this part or other parts for your vehicle, click the link in the description and head over to 1AAuto.com.
Take a straight blade screwdriver, loosen up this worm clamp right here. You can wiggle this off a little bit. If you have to, you can take a pick, get underneath there, loosen up the hose. We'll loosen up this worm clam right here. Just using a straight blade screwdriver. Once that's loose you can rotate the hose back and forth. Just grab a 90 degree pick. Get underneath there and loosen it up. Here we go. There's the hose.
Just take the hose, take the hose clamps. Get those lined up how you want them. Line up the bottom first. Slide that on there. Make sure that hose clamp goes all the way around. I'll get the top one started as well. That's good. Now I can tighten up the hose clamps. Just take the straight blade screwdriver, tighten this one up snug. It doesn't have to be too tight, just snug. Then the same with this one. There you go.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair, and if you enjoyed this video, please click the subscribe button.
11 72 7 555 680
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
BMW is a registered trademark of Bayerische Motoren Werke AG. 1A Auto is not affiliated with or sponsored by BMW or Bayerische Motoren Werke AG.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.