WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Power Window Switch 1992-99 Buick LeSabre
Created on:
Tools used
Flat Blade Screwdriver
8mm Wrench
8mm Socket
Ratchet
1. Removing the Window Switch
Disconnect the negative battery cable with an 8mm wrench
Pry up the switch pack with a flat blade screwdriver
Disconnect the window wiring harness
Pry off the connector from the switch
2. Installing the Window Switch
Match up the pins on the switch with the connector
Connect the switch to the panel
Push the panel into place
Connect the negative battery cable
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a rear-window switch on a '97 Buick LeSabre. It'll apply to the '97, '98, and '99 model year LeSabres, and the procedure from the right door to the left is the same. All you'll need is a small, flat head screwdriver and a new window switch from 1AAuto.
Start by disconnecting your negative battery cable with an 8 millimeter wrench. Use a small pocket screwdriver, flat head, and pry up at the bottom end of the switch pack here and pull it out. There's going to be two clips, one on either side, I'm going to pry up on, pull the switch out.
There's two more clips, right on the inside here, we're going to pry this connector out.
The old switch and the new switch from 1A Auto, identical. It can only go in one way, match up your pins and holes, and snap it back into place.
Feed the front of it in and press down. Finish up by reconnecting your negative battery cable.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
901-067
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
Will this fit as Part # on back of my old window switch is 25623718 on my 1993 Buick Lesabre ??January 28, 2024
Marty H
10
Yes, this switch is listed to fit the front passenger, rear passenger and rear driver door locations of the 1993 Buick LeSabre.
January 29, 2024
Jessica D
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Buick is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Buick or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.