WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How To Locate Temperature Door Actuator 2006-12 Chevy Impala
Created on:
Tools used
Complete SAE Socket Set
Ratchet
Complete Metric Socket Set
1. Removing the Air Door Actuator
Bring the glove box down
Push the back of the glove box up
Remove the two bolts from the air door actuator
2. Installing the Air Door Actuator
Insert the air door actuator
Insert and tighten the two bolts to the air door actuator
Push the glove box back into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you the basics of doing an air door actuator on this vehicle. It's a 2006 Chevy Impala. We found it impossible to video it, so the best we can do is show you exactly where it is and where the bolts are. You'll need a small socket and ratchet set.
Once you know where it is, it's pretty easy. There are two bolts, and you unplug it and then replug it in.
On this Impala, you bring your glove box down and take out anything that might fall out.
Then you push the back of the glove box down, or actually push that part up. The glove box comes down further. Then right back in here, you can see.
Here's the air door actuator. There are two bolts that hold it in place. You would need to undo those bolts with a socket and ratchet, remove it and reinstall it.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HCA40170
In Stock
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Matthew
December 22, 2023
Worked Great!
Joe
May 21, 2024
Great product now I have a cool car
Driver side blend door actuator for 2010 Impala
William
July 20, 2024
It works great as a replacement blend door actuator for the driver side heat cool vent control on a 2010 Impala.
Taylor
Patricia
August 23, 2024
Easy to install. Followed the instructional video. Fit perfectly. Fixed the issue I was having with the knocking noise.
Customer Q&A
Will this work for both the passenger and driver side have 2 ?June 14, 2023
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Cadillac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Cadillac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.