Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly; that's going to save you time and money. Thank you, and enjoy the video.
In this video, we're going to replace the cabin air filter in this 2002 Chevy Impala. The only tools you'll need are a screwdriver and maybe a wrench for some leverage. This is similar for various GM vehicles. Start by vacuuming out the upper cowl area, just to get that debris out, so it doesn't end up falling in. I'm going to pull this weather strip off about half way. This is your washer line; just kind of take that off. Then there's a clip right here, and you just kind of spin. It's got a little mark for a screwdriver, if you need to. There's a little clip right up here in the corner, OK? I'm just going to take a wrench. Take any old wrench, and just kind of put it there. It just gives me a point to pry with, with my screwdriver. There's a little tab right in the middle of that clip. I'm trying to pry that up with the screwdriver.
You have to work it up, and then that pin comes out. You get down in there, and pry the clip out as well. I've got my new filter. I take a screwdriver and just kind of gently pry up on this plastic. It just kind of sticks a little bit. Your filter's right down here. Pull it up. You can see, this one's pretty ugly. Here's the new one from 1A Auto. It does have an air flow indicator. The air obviously goes down and in, so you want to make sure that the air flow arrows are pointing down. You just kind of put that in place. Just kind of reaching in, and lifting up on that corner a little bit. You just kind of just do that, kind of reach in there and muscle it just a little bit. You can see it's all down and in correctly. It pretty much just sits in there, and the suction from your fan just kind of holds it in place. Put this back down. You just put it on; press it right on. Take the larger part of your clip first, push it in. The pin locks it. Take your washer hose, make sure it's back in its clips. Put your gasket back on.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet, and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to replace the cabin air filter on this '99 Oldsmobile Intrigue. The only tool you'll need is a flat blade screwdriver.
You want to pull this gasket up, and take your washer tube out of place. Use a regular screwdriver. For this little plug, turn it counterclockwise, and it comes off. Additionally, you'll see a red arrow there. It's pointing to a little hole. There may be another plug on your vehicle. I'm not sure. I kind of realized it afterwards. I just wanted to point it out. My vehicle did not have a plug there, but maybe yours will. I'm not sure if somebody took mine apart before and then forgot to put it back in. Then, starting up on this corner here, you pull this up, and there's some adhesive that sticks it to the windshield. Pull it up. Pull this out right here. At this point, now you can see down in, grab hold of the cabin air filter. It's got you a little tab right here. There it is. This one is pretty ugly.
The new one from 1A Auto is going to go in there. It's going to allow a lot more air in, a lot cleaner. Put it down in, the black tabs go up on top. You can see there it is, resting correctly. Now, you can see this panel clips in afterwards. So you're going to push this back down into place, and this little retainer just pushes on. Put your washer tube back into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a cabin air filter on this 2003 Chevy Monte Carlo. It's the same part and process on these Monte Carlos from 2000 to 2005. The items you'll need include a new cabin air filter from 1AAuto.com, a flat blade screwdriver, and a vacuum.
Remove your weatherstrip and your washer lines. Now, you want to remove that clip and the one over there, but you can see ours is missing. To remove these clips, just pry up the center, pull it up, and then pry out the bottom. Then for this clip right here, you want to twist it out with a flat blade screwdriver while prying up with another screwdriver. You only need to pry lightly; you don't want to break the clip. Then it pulls free, and then you can lift this panel up and tuck it aside.
Right here is your cabin air filter. You can see ours is in really bad condition, and this is where we recommend you use a vacuum to clean up the area. In this case, just clean it with the vacuum. Then pull your cabin air filter up and out. On the left is the old cabin air filter; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same.
Take your new cabin air filter, and you want the arrow pointing down. Then feed it back into place. Then replace that cowl panel and this clip with the center still up, and then push the center down to lock it. Then re-clip your washer hose back onto those panels, and the same with your weatherstrip. Then push this clip back down into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to replace the cabin air filter on this 2006 Chevy Impala. It's pretty much the same for any 2006 to 2013 Impala. You'll either need a pair of needle nose pliers or a flat blade screwdriver.
There are two clips. Actually, after you open the hood, there are two clips there, and then another one further over there. How you want to remove those is, we're going to use pliers. You can use a screwdriver. Pull up and pull out the middle of the clip. Then pull the clip up and out. Repeat that for the other one. Pull your rear hood lip weatherstrip back carefully. This panel lifts right up. You have to kind of slide it to the side and forward. Just be careful of the washer line, not to break it. There's another small panel there to pull out. Your cabin air filter's right there. You can see the one on this vehicle's quite dirty.
A new filter from 1A Auto is obviously nice and clean. The filter has air flow arrows on it. You want those arrows pointing down. Just place the filter back on top of its mounting area. Make sure it's seated down correctly. Then put the two plastic panels down in. Just make sure they seat correctly. The top panel can be a little difficult. You want to put it into the middle first and then pull that little leg by the hinge of the hood and get it into place. Then put your clips back in place. Finally, replace the rear hood weather strip.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
