Replaces
Frequently bought together
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
48 States Only: Due to shipping restrictions, we can only ship this to a street address within the Contiguous U.S. (lower 48 states).
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the front radiator grille on this 2001 Chevy Malibu, same as any 2000 to 2003. The only tools you'll need are a flat blade screwdriver and a 10mm wrench or socket and ratchet.
Here's your front grille. You can see ours is in good shape. I'll just take it off, and put it back on to show you. It's held in by four clips at the top. Basically, you just take a screwdriver and pry up on the middle of each of clip, and pull it up and out. Then pull forward just a little bit, grab underneath the sides, and pull it up and out.
If you're replacing your grille, you'll want to switch over this chrome bar on the front and there's just five 10mm nuts. Use a 10mm wrench, and take these five off, transfer to the bar on to your new grille. Put it back on. Getting the grille back on is pretty simple. Line up all your tabs, push it down, and in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
