Kit Includes: (1) Passenger Side Fog Light (1) Driver Side Fog Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Vehicle Body Option
with New Body Style
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How To Replace Fog Lights and Bulbs 2007-15 Chevy Silverado
How to Replace Fog Lights 2007-14 Chevy Suburban 1500
Created on:
Tools used
Bent Tipped Awl
Pick
1. Removing the Fog Light
Place a pick behind the fog light
Pop the fog light out
Disconnect the headlight wiring harness
2. Replacing the Fog Light Bulbs
This step is only necessary if you are replacing the fog light bulbs
Turn the base of the bulbs counterclockwise
Remove the old bulbs
Disconnect the wiring harnesses from the old bulbs
Connect the new bulb to the wiring harness
Insert the new bulbs
Turn the base of the new bulbs clockwise
3. Installing the New Fog Light
Reconnect the wiring harness to the headlight
Line up the tabs on the fog light to the bolt holes on the vehicle
Push the fog light in
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a fog light on this 2011 Chevy Silverado 1500. It's the same process on a large variety of Chevy trucks from 2007 to 2012. We're going to show you this if you need to replace your fog light because it's broken, or if you just need to replace the bulb in the fog light. The only tool you'll need is a 90 degree bent tip awl or pick, and you'll see how to use it.
What you want to do is just stick the pick back behind the fog light and just pop it right out. To disconnect the harness, you just push on the tab on the top and pull it away.
Now to change the bulb, you just push on these tabs and pull the bulb right out. Then you just push it back in and click it in.
To reinstall, you just line up the light and push the harness in. You can see there's three holes here, and you want to push these little ball shaped tabs into them and they pop right in. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Flat Blade Screwdriver
7mm Socket
Ratchet
Trim Tool Set
1. Removing the Fender Liner
Remove the 7mm bolts from the fender liner
Pry out the barbed clips in the liner with a flat blade screwdriver
Peel back the fender liner to access the bulbs
2. Removing the Fog Light
Disconnect the wiring harness
Press the tabs on the housing and push them through
Hold the fog light and remove it
3. Installing the New Fog Light
Insert the fog so that it matches the slots until it clicks
Connect the wiring harness
4. Reinstalling the Fender Liner
Press in the clips to the fender liner
Tighten the 7mm bolts to the liner
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
So we're going to peel this splash shield back. It also will make it easier if you turn your wheel to the inside of whatever side you're working on so you can open this up. You can it’s in with some 7mm self-tapping screws and some push clips.
I'll start with the 7mm self-tapping screws. Using a flat-bladed screwdriver or trim clip tool, you're going to work these barbed clips out. Now we fold this up. Now you can peel you fender liner back and reach in and disconnect your fog lamp.
These three tabs or clips are tabbed on them on either side. You can squish them together with your fingers and push them out. Two top ones, now you reach out with your other hand to hold the fog light from the front. Squeeze the bottom one, sort of push them out, and then you're going to push from the middle to remove your fog light lens.
To install it, I'm going to leave these clips on here. Feed it in from the front, get it lined up with the holes, push it in, and that will click into place.
Reconnect the harness and your fog light lens is replaced. Pull that down. And then pull this down and push it back into place.
Replace the barbed clips if you took them out. Reinstall the 7mm self-tapping screws.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
LTA87948
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Clear, clean, solid, bright.
Fred
November 21, 2024
Quality seems very good.
After viewing their viewing their removal/installation video the procedure was fairly quick. Totally painless.
They are aimable. I measured the adjustment on the old set. Adjusted the new ones. Pressed them into place.
Tossed in a pair of brand name dual spectrum LEDs.
The combination is clear & bright.
Time will tell on overall quality.
Almost makes me look forward to bad weather.....almost.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.