Kit Includes: (1) Passenger Side Fog Light (1) Driver Side Fog Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How To Replace Fog Light 2000-06 Chevy Suburban
Created on:
Tools used
10mm Socket
Ratchet
1. Servicing the Bulbs
Lift up on the fog light harness and disconnect it
Twist the bulb socket counterclockwise out the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
Reconnect the harness
2. Removing the Fog Light
Lift up on the fog light harness and disconnect it
Remove the two 10mm bolts from the fog light bracket
Pull the fog light out
3. Installing the Fog Light
Insert the fog light into place
Replace and tighten the two 10mm bolts
Connect the fog light harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire fog light assembly on this 2002 Chevy Suburban. It's the same part in some of the process on these Suburbans from 2000 to 2006. We show you on the driver side, but the passenger side is the same procedure. The items you'll need include a new fog light from 1AAuto.com, a 10mm socket, and a ratchet.
To change your fog light bulb, you'll just reach in behind the fog light. Life up the tab on the harness, pull it free and twist your bulb out. Take your new bulb, twist it back in clockwise, and reconnect your harness.
Now, to replace your entire assembly, you want to disconnect this harness by pulling up the tab and pulling it free. Then you want to remove these two 10mm bolts up on top of the fog light. We'll just fast-forward as Don does that. Once those are removed, the fog light will pull down and out.
On the left is the old fog light; on the right is the new one from 1A Auto. You can see they're identical, and will fit exactly the same. Take your new fog light and push it back into place. Then replace those two 10mm screws. We'll fast-forward as Don does this. Reconnect your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
LTA88392
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.