Replaces
Frequently bought together
Item Condition:
New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the air intake box on this 2002 GMC Sierra 2500HD. It's the same as most 2000 to 2002 Chevy, GMC and Cadillac trucks with the 6 liter and 8.1 liter V8s.The items you'll need for this are a new air intake box from 1A Auto, flat blade screwdriver, Phillips screwdriver, Torx 25 driver and penetrating oil.
The first thing you'll want to do, is use a flat blade screwdriver to loosen that bolt. That will loosen the clamp and you should be able to pull that hose right off. The next thing to do is, pull that air intake box towards you to release the clips on the bottom. Push it forward and pull it up and out.
As you can see, on the right is the old air intake box and on the left is the new one from 1A Auto. First, remove that air filter life indicator from the old air intake box and move it over to the new one. Remove the Phillips screws from the old air intake box. Fast forward as he removes the 4 screws. Remove the top of the old air intake box and then remove that air filter. Set that aside and then, using a T25 Torx bit or Torx driver, remove those T25 screws in the air intake box. Fast forward as he removes those 4 screws. Now put your air filter into your new air intake box, it should press right down in. Put the top on and then tighten those T25 Torx screws.
Start off by just spraying some penetrating oil into those holes that the air intake box will push into. To help you get the air intake box in there it helps if you move this mass airflow sensor. Just loosen up that bracket and pull that out. Push the air intake box down in. You may need to move it around a little bit to get it to fit down into place. Once you get those tabs lined up, push it right down into those holes. Take the mass airflow sensor and feed it down into the spot between the hose and the air intake box. It's easier if you push that straight into the air intake box and attach it to that first. As we finish up here, put the hose back on the mass airflow sensor then use your flat blade screwdriver to tighten up the clamps.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the air intake box on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 2002. The items you'll need are a new air intake box from 1aauto.com, flat blade screwdriver, and a T20 Torx driver.
Start off by loosening up this hose clamp and then pull this hose from the air box. Lift up the air box and push it toward the engine to free it from the side and then lift up that hose and lift your air box up and out.
On the left, is the old air intake box. On the right, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Swap over your air filter meter and then loosen up the four screws on your old air intake box. Now, the top of the box will pull free. Now, remove the four T20 screws on your new intake box and we'll fast forward as Don does this. Lift the top off, put the air filter into place, and then put the top back down. Replace those four T20 screws.
You want to push these three tabs down into these three holes. Pull back the air hose and push the back end of the air box down in first. Push the box straight down into place and make sure you push those tabs in. Push the hose back onto the front and then tighten up that hose clamp. We recommend taking the sticker from your old air intake box and transferring it over to your new air intake box, only because it has some important information on it, such as your spark plug gap size. Just peel it off. It stays sticky, but you can add more glue if you feel it's necessary and then just push it into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
