WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Lumbar Support Switch 2000-06 Chevy Suburban
How to Replace Seat Switch 2000-2006 Chevy Tahoe
How to Replace Seat Switch 2001-07 Chevy Silverado
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
7mm Socket
Ratchet
1. Removing the Lumbar Support Switch
Remove the four Phillips screws from the seat switch panel
Pull out the panel
Disconnect the two seat switch wiring harnesses
Remove the two 7mm bolts from the lumber support switch
Pull off the lumbar support switch
2. Installing the Lumbar Support Switch
Push the lumbar support switch into the switch panel
Insert the two 7mm bolts into the switch
Connect the two seat switch wiring harnesses
Push the switch panel into place
Insert the four Phillips screws into the switch panel
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the lumbar support switch on this 2002 Chevy Suburban, and the tools you'll need for this are a 7mm socket and ratchet, a Phillips screwdriver, and a flat blade screwdriver. Start off by removing these four Phillips screws and we'll just fast forward as Don does that.
Now, just pull straight out on this panel, and then you want to just pry down on this tab, and pull the harness free. Then for this harness, you want to just push down on the tab, and disconnect it. Next, remove these two 7mm bolts, and then the switch pulls right off.
Push your new lumbar support switch back into place, and then replace those two 7mm bolts. Reconnect the two harnesses. Now push the seat switches back into place, and then replace those 4 Phillips screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Gloves
Socket Extensions
Socket Driver
Phillips Head Screwdriver
7mm Socket
Safety Glasses
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
7mm Socket
Ratchet
1. Removing the Seat Switch
Remove the four Phillips head screws from the seat switch panel
Pull the panel off of the seat
Disconnect the seat switch wiring harnesses
Remove the three 7mm bolts that hold the switch to the switch panel
2. Installing the New Seat Switch
Push the new switch into the panel
Insert the three 7mm bolts into the switch
Connect the seat switch wiring harnesses
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the seat switch on this 2002 Chevy Suburban. On this particular vehicle, it's the twelve-way seat switch, but the regular seat switches use a similar procedure. The tools you'll need for this are a 7mm socket and ratchet, a Phillips screwdriver, and a flat blade screwdriver.
Start off by removing these four Phillips screws. We'll just fast forward as Don does that. Now just pull straight out on this panel. Then you want to just pry down on this tab and pull the harness free. For this harness, you want to just push down on the tab and disconnect it. Now remove these three 7mm bolts. Now the switch will just pull right out.
Take your new switch and push it into place, and then replace those three 7mm bolts. Reconnect the two harnesses. Now push the seat switches back into place, and then replace those four Phillips screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
PSW15
In Stock
Product Reviews
Loading reviews
4.50/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Chevy seat switch
P
November 12, 2018
Perfect fit and works good. Bad design from GM. Second broken one to be replaced. Also great price.
Awesome Price
Gina
September 27, 2019
Very satisfied with this purchase! Works great!
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.