Replaces
Replaces Chevrolet GMC Olds Isuzu Front Steering, Suspension, & Brake Kit TRQ PSA64826
$493.95
Replaces Chevrolet GMC Olds Isuzu Multiport Fuel Injection Conversion Standard Motor Products FJ503
$402.95
Replaces Chevrolet GMC Olds Isuzu Front 13 Piece Steering & Suspension Kit TRQ PSA64988
$375.95
Replaces Chevrolet GMC Isuzu Front 8 Piece Steering & Suspension Kit TRQ PSA50207
$334.95
Replaces Chevrolet GMC Olds Isuzu Front 6 Piece Suspension Kit TRQ PSA63586
$314.95
Replaces Chevrolet GMC Isuzu Front & Rear Ceramic Performance Brake Pad & Rotor, Shoe & Drum Kit TRQ Performance BKA92567
$314.95
Replaces Chevrolet GMC Olds Isuzu Front Upper & Lower 4 Piece Control Arm with Ball Joint Set TRQ PSA85048
$310.95
Replaces Chevrolet GMC Isuzu Front 6 Piece Suspension Kit TRQ PSA65469
$309.95
Replaces Chevrolet GMC Isuzu Front Upper & Lower 4 Piece Control Arm with Ball Joint Set TRQ PSA66606
$301.95
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the idle air control valve on this 1996 Chevy Tahoe. It's the same part and process on these Tahoes from 1996 to 2000. The items you'll need for this are a new idle air control valve from 1AAuto.com and a T20 Torx bit and ratchet with an extension.
Your idle air control valve is located right here. You want to just pull back on the tab and then remove that harness, and then remove these two T20 Torx bolts. We'll just fast forward as Don does that. Now you can just pull it right out.
On the left, is the old idle air control valve. On the right, is the new one from 1A Auto. You can see they're identical and they'll mount exactly the same. Now, push your new idle air control valve into place and then replace those two T20 Torx bolts. You can see he just replaces the bolts by hand and then tightens them up with that bit and ratchet. Reconnect the harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your idle air control valve or IAC on a 5.7l V8.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need parts for your truck, you can follow the link down in the description over to 1aauto.com.
Here are the items you'll need for this repair.
Lift up on the latches and remove the upper portion of air box. Unplug the intake air tab and mass airflow sensors. Pop the breather line off and undo the thumb screw. Rock the upper part of the intake forward and remove it from the vehicle. Your IAC or idle air control valve is located on the back of the throttle body on the driver's side. This is a little electronically actuated solenoid that changes the amount of airflow allowed to pass the throttle body for when your foot is off the throttle and the blade is closed. To replace this, we'll remove the electrical connector. You can then remove the two T20 Torx bolts with a Torx bit and a ratchet. Once the bottom bolt is loose, you can remove your idle air control valve.
Now that it's out, you can see where that bottom bolt hole is that sits in there kind of like this angle and it's pretty tricky to see that one once it's in the car, so you just got to feel around for it.
Reinstall the idle air control valve and start the T20 Torx bolts. Once the bolts are started, you can tighten them down with your T20 Torx bit and the ratchet. Reconnect your electrical connector.
Reinstall the intake tube by hooking the tab over the front of the throttle body and setting them back into place. Reinstall the thumb screw onto the stud. Reinstall the tube into the filter as well as locking into the back of the air box. Reconnect your mass airflow and intake air temp sensors. Drop the lid back into place. Secure the tabs. Install the breather line and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
