WARNING: This product can expose you to chemicals including Acrylonitrile and Butyl benzyl phthalate (BBP)d, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Parking Brake Release Handle 1995-2000 Chevy Tahoe
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Parking Brake Handle
Pull out the handle
Push in the tabs on both sides with a flat blade screwdriver
Remove the brake handle
2. Installing the Parking Brake Handle
Push the handle into place until it clicks
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the parking brake release handle on this 1996 Chevy Tahoe. It's the same part and process on this Tahoes from 1995 to 2000. The only tool you'll need for this is a flat blade screwdriver.
To remove the handle, you just want to push in the tab on this side, the tab on this side, and pull it free. Just push it in, pull that side out, and do the same thing on the other side, and you may have to go back and forth a couple of times and then it will pop free.
On the left is the old parking brake release handle; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
Take the new handle and just push it into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
74449
In Stock
Product Reviews
Loading reviews
5.00/ 5.05
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Works great
Joshua
June 30, 2019
Fits great and works great
It was a snap! Literally!
George
January 13, 2020
The Yukon hand brake release handle was literally a snap. Out of the package and snapped into place in less than a minute just as advertised.
Brian
March 15, 2022
Perfect replacement for the broken handle on my truck
Emergency brake handle
steve
June 18, 2023
Fit perfect. Looks like brand new.
Marvin
April 26, 2024
Fit perfectly!
Customer Q&A
Is it hard to replace actuator fresh air?August 22, 2021
Gilbert B
Will it fit 1995 k2500 pickup?December 13, 2021
John D
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
December 13, 2021
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.