WARNING: This product can expose you to chemicals including Formaldehyde and Toluene, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Rear Wiper Arm 2007-14 Chevrolet Suburban
Created on:
Tools used
13mm Socket
19mm Socket
Ratchet
1. Removing the Rear Wiper Arm
Pull the cover off the wiper arm stud
Remove the 13mm nut from the wiper arm stud
Attach a wiper arm puller to the wiper arm
Turn the puller with a 19mm socket and ratchet to release the wiper arm from the stud
Pull the wiper arm off the stud
Disconnect the washer fluid line
2. Installing the Rear Wiper Arm
Slide the wiper arm onto the stud
Connect the washer fluid line
Fasten the 13mm nut onto the wiper arm stud
Push the cover onto the stud
Test that the rear wiper works
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
In this video, we will be removing and reinstalling a rear wiper arm in a 2009 Chevy Suburban. If you need this part, or other parts for your car or truck, click the link in the description and head over to 1Aauto.com.
We're going to pull this cover off. Just pull up on the back side and then you're going to grab and separate. Then it'll pull out. There's two tabs right there.
With a 13 millimeter socket and a ratchet will take this nut off. We can use this tool. We sell this at 1AAuto.com. With a 19 millimeter socket and a ratchet, we'll release the wiper arm. Pull that off and we can pull this for the washer fluid. Just pull it straight out.
So we'll put our arm back on. Take our washer fluid feed and plug that in. Make sure it goes around the arm this way and put our nut back on. Using our 13 millimeter socket and a ratchet, we'll snug that down. Install our guard back on. Just push it straight on. Now we're going to test it to make sure it works.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
42666
In Stock
Product Reviews
Loading reviews
5.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Rear wiper arm install
Dewey
January 26, 2017
Follow instructions and install takes 15 min at most. Much better than going to dealer.
Happy wife!
David
March 24, 2024
Fit and works perfectly- my wife is very happy! How to video was super helpful. Watch closely on how to route the washer fluid line- I had to trim mine for the best length.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.