Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the four-wheel-drive front axle shift actuator on this '96 Chevy Tahoe. It's the same part and process on these Tahoes from '95 to '99. The only items you'll need for this is a new four wheel drive front axle shift actuator from 1aauto.com and an adjustable wrench.
Your front axle shift actuator is located right here and the harness for it is right here. Pull this off that bracket and pull back on this tab and pull the harness free. Then, pull the wire out of that bracket. Now, using an adjustable wrench, you just want to twist this out. Once you break it free, you can twist it the rest of the way out by hand and then it just pulls free.
On the left is the old front axle shift actuator. On the right is the new one from 1aauto. You can see they're identical and they're going to fit exactly the same. Take your new front axle shift actuator and twist it into place and then tighten it up with your adjustable wrench. Now, you want to put the wire back through that bracket and then reconnect the harness. Then, just slide the harness back onto that bracket and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
