WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Four Wheel Drive Switch 1998-2005 Chevy Blazer S10
Created on:
Tools used
Flat Blade Screwdriver
1. Remove the 4wd switch
Pry up the switch from the dash with a flat blade screwdriver.
Unplug the wiring connectors.
2. Install the new 4wd switch
Plug in the wiring connectors.
Clip the switch into the panel.
Brought to you by 1AAuto.com, your source for quality replacements parts, and the best service on the Internet. In this video, we're going to show you how to replace the four-wheel drive dash switch on this 2000 Chevy Blazer, same as most of this era Blazer. The only tool you'll need is a flat blade screwdriver.
To remove this four-wheel drive switch; it's pretty easy. Just use a regular screwdriver, and carefully work it in to the top here. Be careful not to scratch your dash at all. If you push down a little bit, the switch pops out. There are two connections; the blue connector, work your screwdriver in, pull up and out. Then this white one; put your screwdriver right in there, and pull it out. Here on the left is the original switch. On the right is the new switch from 1A Auto. You can see it's all the same. It's going to plug in the same. What can happen on these switches is, when you press a button, you should see the light flash and then it goes solid. The light goes solid when the transfer case engages. What can happen is, these lights can go out and then you don't know what mode you're in. To re-install you can see also that the switch can go bad after time, too. Just plug everything back in, and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet, and in person.
901-060
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.