Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Third Brake Light 2000-06 GMC Yukon
How to Replace 3rd Brake Light 1995-2000 Chevy Tahoe
Created on:
Tools used
Phillips Head Screwdriver
I'm gonna take these two screws out, just use a Phillips head screwdriver. Take that screw out. Just slide the light straight back. And it's gonna be a little bit tight right there. Disconnect the connector, slide this out and slide it off. This rubber piece has to come off. Just slide this out of here. We can reuse that. Take this, slide this into the new light assembly. And that looks good. All right. Connect the connector. Put this back in position. Kind of helps if you angle it a little bit. Push that rubber piece all the way through. And that's good. And put the screws back in. And snug those up.
Tools used
Razor Blade / Gasket Scraper
Phillips Head Screwdriver
1. Removing the Brake Light
Pry out the panel and remove the two clips
Separate the yellow and black harness by pulling back on the tab
Remove the two Phillips screws from the brake light
Pull the light up and out
2. Installing the Brake Light
Push the wires into place
Cut the grommet into a square shape with a razor blade
Feed the wire into the hole
Remove the adhesive strip covers
Push the third brake light down into place
Replace the Phillips screws
Reconnect the harness
Replace the panel by feeding it underneath the side panels
Line up the panel and hit it into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the third brake light on this 1996 Chevy Tahoe. The items you'll need for this is a new third brake light from 1AAuto.com and a Phillip's screwdriver.
Start off by prying out this panel. It's held in with two clips: one right here, and another one in the same spot on the other side. Right here, this yellow and black harness is the one to your third brake light. Just pull back on that tab and pull it free. Your third brake light is held in with two Phillip's screws: one right here and one right there. We'll just fast forward as Don removes those. Now, pull the light up and out.
Up front is the old third brake light, and behind it is the new one from 1A Auto. You can see they're identical, and they'll mount exactly the same. Just detach your harness by pushing those wires into place. Because this third brake light is for several different vehicles it does have this grommet here that you don't need. Using a razor blade just cut it into a square shape. Just feed that wire down into that hole, remove the adhesive strip covers, and push the third brake light down into place. Once you have it in place, just replace those two Phillips screws. Now, reconnect your harness and replace this panel by just feeding it up underneath the side panels. Then, just line it up and hit it into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
LHT05869
In Stock
Product Reviews
Loading reviews
4.82/ 5.011
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
2
0
0
0
Better-than-expected
L
December 30, 2020
Initially I didn't know what to expect especially given the prices much cheaper than all the other local automotive stores O'Reilly's AutoZone even NAPA Auto Parts. I took the other one off I didn't think you was going to really lineup but it did perfectly I was shocked it works beautifully it looks nice it almost looks like the original which was a plus for me would highly recommend this part
3rd Brake Light 2000 Tahoe Z71
R
January 27, 2021
It was a perfect fit and very easy to install even in 20 degree weather. The ordering process was very easy. The only reason I didn't give it 5 stars is because it took just shy of three weeks to receive the part.
Great Price..Arrive Quickly..Perfect Fit!
peter
March 16, 2021
Item was priced well, shipped out immediately, and was a great fit replacing original OEM light.
Nice part but did not fit my truck
R
April 16, 2021
Great looking product, but did not fit my 2001 chevy suburban.
Great part
albert
June 4, 2021
Came with adapters to work for my vehicle and nice quality.
Tahoe
rodney
July 12, 2021
Perfect, just what I needed
3rd brake light 1998 Tahoe LT works perfect and best price
Mark
June 28, 2022
Received the 3rd brake light in no time, installed it in 10 minutes, and after years of it being out, it finally worked again!
Looks fantastic
Darieux
August 7, 2022
Very happy,,,high quality, very bright
Fits perfect,,,
Perfect fit
Mark-
February 19, 2023
Perfect fit, I watched there video on YouTube and it quite easy, would recommend
Great Product!
Robert
June 21, 2023
The third brake light was easy to install and works great. Best of all it sealed up the water leak, which was the reason I needed to replace the old on.
John
March 13, 2024
Fits great and had it installed in no time.
Customer Q&A
Are the screws and mounting nuts included?August 10, 2022
John D
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
August 10, 2022
T I
Will this fit 2nd Generation 2001 chevy Tahoe with Barn/Cargo Doors?December 6, 2022
Joseph T
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
December 6, 2022
T I
Does this fit 1996 Blazer where the lightassembly mounts on the Gate Glass (not the roof)?April 7, 2024
Richard R
10
No idea! Mine mounts on roof!
April 8, 2024
Richard S
10
No, this will only mount on the roof, not the glass. We do not have a design for your application for the glass.
April 8, 2024
Jessica D
10
If by mounting on the gate glass you mean mounting on the top of the frame for the gate glass rather than the roof, yes, it will work but requires a bit of modification. About 5 minutes with a Dremel tool took care of it for me. But no, it is not a direct fit out of the box.
May 19, 2024
Rob E
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.