TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Side Mirror 2002-09 Chevy Trailblazer
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Door Panel
Pry up the switch panel.
Disconnect the harnesses from the switch panel.
Push down on the tabs on the door handle bezel and pull the bezel and harness out.
Remove the two 10mm bolts from the door panel.
Pry out on the top of the triangular part of the door panel. Pull out the clips around the door panel.
2. Removing the Side Mirror
Remove the gasket.
Disconnect the mirror harness.
Pull the harness clip out of the door.
Remove the three 10mm nuts.
Pull the mirror out and off.
3. Replacing the Side Mirror
Feed the mirror harness down through the door.
Line up the mirror and push it into place.
Replace the three 10mm nuts.
Push the harness clip back into the door.
Reconnect the mirror harness.
Replace the gasket.
4. Replacing the Door Panel
Line up the door panel and push the clips in around the panel.
Replace the two 10mm bolts.
Feed the bezel harness down into the door.
Replace the bezel.
Reconnect the switch panel.
Push the switch panel into place.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you removal and replacement of the side view mirror on this 2004 Chevy Trailblazer. Tools you'll need are a small and medium flat blade screwdriver and a 10mm socket with a ratchet and extension.
Maybe your mirror has been smashed or it's like this. The inside kind of falls apart and now it flaps around. Start with a regular screwdriver. Put it up under, a quick little pry. Same thing here. Okay. Pry that up. You can see this got two clips, front and back. Okay. Then you want to turn it over and you will unplug all these harnesses. Basically, several thumb tabs. Pull them up. Okay, skip that one. This one pulls up very easy. Use your screwdriver. Just pry that up a little bit then lift that off. Then over here, screwdriver on this tab. Pry it up a little bit. Hook it right out. This comes out. Now, around your door handle here, you're going to see some little tabs, little slots, you can inserts a small screwdriver. Push down your screwdriver and then pull out with your hand. Work your hand underneath. Another tab right back here. Push down, pull out. Then there's a couple up top. Okay. Those ones, you push up. Okay, one more right here. Okay, this whole thing comes out. If you have the memory seat and everything, you can now just pull this whole harness right up and out.
There are two 10mm bolts. One there. Then one way down in there. 10mm socket with a extension and ratchet. This one's really easy to get to. Pull this one out. This one. You're going to start. Unscrew as much as I can. I just felt that fall which is okay. Once you have those out, then you can start up here with your hand. Just work it underneath this triangle. Pull out and then just kind of work your hand under the door panel. It will get harder and harder to slide under. Just pull. Okay, keep working your hand under, pull. Work your hand under, pull. Actually here's my bolt from that arm rest. Okay, work our hand under, pull out. Okay. Your door panel comes off. Remove this gasket. You can see that our harness lead comes all the way down here. Pull it off the door. 10mm nuts. Okay, speed it up here a little bit as I loosen those up. The mirror comes out.
Okay. New mirror from 1A Auto. Has the correct connection and everything. Just reverse the procedure. Take that down in. Okay, here we'll fast forward again as I put those three nuts on and then tighten them up. You want them tight nice and snug. You don't want to over tighten them because the mirror base is plastic and it could break. Put that installation back in. One thing I did forget to do here is just kind of run that wire back into its clip when I did that before I put the door panel back on. Now, I'm going to fast forward here through putting the door panel back on just in the interest of keeping the video a little bit on the short side. Once you get it off, it's pretty easy to get back on. If you do want to see this in real speed or regular speed, just check out our other videos for the Trailblazer front door panel, remove and replace. Okay. I'm turning the key on, put the window down just so you can see and do a quick test on the mirror. You can see it works.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
MRA08114
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Passenger side mirror
Warren
October 8, 2017
Very pleased at pricing
Very pleased with shipping quickly
Very pleased a1 has the video on installation
What more could you ask for!! Thats not a question its a statement, ive ordered other parts for my other trucks and same great service consistently
Customer Q&A
Will this replace one that USED to have a turn signal? Those direct replacements don't seem to exist...July 7, 2017
M I
10
The one I received did not have a turn signal in the mirror.
July 7, 2017
Chris A
10
Mine didn"t.
July 7, 2017
Andy E
10
I believe this will. Bought this for my daughters 2008 Trailblazer and it was a perfect fit.
Mike
July 7, 2017
Michael A
10
I did not have a turn signal. May well still work, might need a slight wiring fix. See if your mirror has 2 connectors. Generally this product is vary good.
July 7, 2017
Robert S
10
They may work, however the pin set up could be different.
July 7, 2017
Alex P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.