Replaces
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox. We're going to show you how to remove and replace your blower motor for the HVAC.
If you like this video, please click subscribe we have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm socket and ratchet, ¼ inch socket, socket extension
Remove the two 7 millimeter screws, securing this panel underneath the passenger side floor. We'll do this using the 7 millimeter socket ratchet and extension. Once the two screws are removed, remove the panel from under the dash. You'll have to push it over to the passenger side to release it from its hook next to the blower motor. Remove the panel from the vehicle.
Remove this harness bracket from the bottom of the blower motor, push down and release the electrical connector. Remove the three quarter inch screws around the blower motor. We'll do this with a socket ratchet and extension. Support the blower motor while removing the last screw and remove the blower motor from the HVAC box.
Re-install the blower motor. Be sure not to pinch any harnesses, and make sure that the connector for the motor is facing the right way. Start your quarter inch screws by hand before tightening them down with your socket and ratchet. Reconnect the electrical connector and snap the harness retainer back into place. Reinstall the under dash cover. Remember it goes to the passenger side first and we'll have to pull it over. Reinstall the two 7 millimeter screws. We'll start these by hand and then tighten them down with a socket and ratchet.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
