All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Blower Motor Resistor 2005-10 Chevy Cobalt
Created on:
Tools used
No Tools Needed
1. Removing the Fan
Push the tab on the resistor harness back and disconnect it
Pull back on the rest of the tabs
Pull the resistor down and out
2. Installing the New Resistor
Lock both sides on the front and back
Reconnect the harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
So if you've got one of these Cobalts and the fan is not working on all speeds maybe it works on one and four, but not the middle it's a pretty easy fix. You want to put a new resistor from 1A Auto in.
Right under your glove box, on the passenger side and above the passenger's feet, is the resistor right here. With your thumb you can pull on this tab here back and disconnect it. There's a tab right here. Pull back on that tab and pull down. There's a tab on the opposite side. You push towards the front of the car and your resistor comes right out.
Here's your original resistor, here's the new resistor from 1AAuto.com. Make sure when you put it up the lock for your harness is facing you. We just slide it up in and make sure both sides lock on the front and back, then reconnect to your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
15-80879
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Is the AC Delco worth the extra money.?
leon
December 3, 2018
For piece of mind I believe it is worth the extra money to use AC Delco parts..
Have purchased same item for other vehicles and have had no issues with quality or performance.
Customer Q&A
will this fit my 2006 colbalt Vin#1g1al18f567653393 ?January 4, 2021
Ernest B
10
Yes, according to the information you provided, this part will fit your vehicle.
January 7, 2021
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.