Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the fog lights on this Chrysler Pacifica. We show you both, if you're just looking to change a bulb or if you need to replace a broken light with a new light from 1A Auto.
The fog lights are pretty easy. If you look right up under here, you'll see the Phillips screw. Use a Phillips screwdriver. Use it to put some pressure up and get the screw going. A lot of times there's a lot of sand and stuff in there. It kind of makes the screw stick a little bit. Pull that screw out. Grab the light, shake it around a little bit and pull it out.
Pull it some more and the bulb just connects right in there. Pry up on the tab. Disconnect it. If you're just looking to just replace the bulb, turn the bulb counter clockwise, pull it out. Put the new bulb in.
If your light's been broken, obviously, you need to remove the remains of the light. You can see the new from 1A Auto is the exact same as the original. It's going to go right in. Make sure you plug it in securely first. There's just two tabs that hold it back in the back. You just have to put it up in straight. Put your screw back in. Then you are all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
