Replaces

2011 Chrysler 200 Front Driver & Passenger Side Lower 2 Piece Ball Joint Set TRQ PSA63087

11-13 Chrysler 200; 07-10 Sebring; 08-13 Avenger; 09-13 Avenger Front Lower Ball Joint Pair

$ 47.95

$58.95

19% OFF

$58.95

19% OFF

FREE SAME DAY SHIPPING

Read 10 REVIEWS

PSA63087

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

Part Details

Kit Includes:
(1) Front Passenger Side Lower Ball Joint
(1) Front Driver Side Lower Ball Joint
Quantity: 2 Piece

Specification

Side Location

Driver & Passenger Side

Location

Front
Lower

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.70/ 5.0

Good Quality Replacement

As expected the parts arrived on time and were as promised when purchased. I was able to install both driver and passenger side without removing the tires even Though it was nessasary to rent a ball joint press. Test drove after install and I was impressed but not surprised I felt that I was In control again. Excellent value for The price and sold as a set saved time and money.

As advertised

Eric

Fit like a glove

Good ball joints

Shawn

Only reason I did not give four stars is that they are NOT greaseable. Other than that they are good!

The good stuff

Stanley

The simple things matter, on time, fair prices, common sense courtesy

Joel

Works well

Good

Haskell

Good part. fit perfect.

Good ball joints

Heather

Fit is a slight bit off compared to factory, but does fit and work fine. The split ring sits a hair higher above the lower control arm than the factory ball joint on the 2009 Sebring. Solved the front end noise I was experiencing. Install is a bit tough if there is any rust.

Clinton

Working great. Easy to change

Josh

Great fit. Seems to be holding up well

Ball joints

Robert

Perfect fit

Customer Q&A

Do I have to rent a ball joint press tool to install ball joints on a 2008 avenger?

July 17, 2019

Angela R

These will need to be pressed into the control arm. You can either rent the tool for a do it yourself installation, or your local shop should have the equipment available to do the work for you. Please contact us if you have any further questions.

July 17, 2019

A C