WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Tailgate Cables 2002-08 Dodge Ram 1500
Created on:
Tools used
Flat Blade Screwdriver
T45 Socket
Ratchet
Needle nose pliers
Block of Wood
1. Removing the Tailgate Cable
Support the tailgate
Lift the tailgate slightly
Pull the tailgate cable of the truck bed stud
Remove the T45 Torx bolt from the tailgate
Pull off the tailgate cable
Pull the washer off the tailgate cable with needle nose pliers
2. Installing the Tail Gate Cable
Hook the tailgate cable onto the truck bed stud
Put the washer into place on the tailgate
Put the tailgate cable into place on the tailgate
Pull out on the cable as you Insert the T45 bolt into the tailgate
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tail gate cables on this 2004 Dodge Ram, same as most of the Dodge Rams of this era. The tools you'll need are a T45 Torx driver or a bit with a ratchet handle, and a small screwdriver and pair of pliers possibly.
Replacing your tail gate's a pretty easy process. Lift up a little tab, and slide your tail gate up. Now make sure that your tail gate is supported. Make sure your other tail gate cable is good or you support it because if you let your tail gate down and it hits the bumper it can bend your tail gate.
Now this is a T45 Torx bolt and just note how this bracket goes in, a little bracket to keep your tail gate from rotating too far and getting pinched. If you want to save this hardware, take a little screwdriver like this, and pry it up under this little washer. Now use a pair of needle nose pliers and just kind of pull on this washer, twist it and break it off.
A new cable from 1A Auto is all the same. It has the same end on that end and the same locking end there. You just put it onto the posts, lock it into place and on like that. Oops I, think I did it wrong, like that. This is a shouldered bolt so you want to make sure you get the cable on to it. I'm pulling the cable out against the bolt and tightening up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.