Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Determining whether or not your vehicle is a California emissions or a federal emissions vehicle is pretty straightforward. To do this, you'll want to locate your catalyst sticker under the hood of your vehicle. It'll either be actually on the bottom side of the hood, most GM vehicles have it on the air box, and other vehicles may have it along your radiator support at the front of the engine bay.
All you need to do is see, "This vehicle conforms to California regulations." That means that this vehicle is a California emissions car. Just because you're not in California or are in California doesn't necessarily mean your vehicle will be one way or the other.
Now, our F150 has it down here on the radiator's support, right at the front of the engine bay and you can see here, "This vehicle conforms to US EPA regulations." This means that this vehicle is a federal emissions.
Now, here we have two things that are a little different. Our catalyst is located on the vehicle's air box and this vehicle conforms to US EPA regulations and California regulations. If it conforms to both federal and California emissions, it's considered a California emissions vehicle.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace the EGR valve on a 5.7-liter V8.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need these parts for your truck, you can follow the link down in the description over to 1aauto.com.
Here are the items you'll need for this repair: 10mm socket, ratchet, socket extension
Loosen and remove the 10 millimeter hold down bolt for the water pump pipe. Do this with a 10 millimeter socket ratchet and extension. Disconnect the electrical connectors for the coolant temp sensor and the EGR by lifting up on the tab and unplugging them. You can now remove the two 10 millimeter bolts, one at the bottom here and one opposite it in the top right corner of the 1:00 position. You can now remove the EGR valve from the vehicle.
Make sure your gasket is off. Ours just fell off when we undid it so make sure you find that. If there's anything still stuck to the mating service, make sure to remove that. Install your new gasket and setup a bolt. This will just make it easier to line everything up.
Install the EGR along with the new gasket. Just want to make sure that that gasket doesn't come out of place. We need to do some fine tuning. You can now tighten down the two 10 millimeter bolts, reconnect your electrical connectors, and reinstall the 10 millimeter hold down bolt for the water pump too.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EGR valve on this 2002 GMC Sierra 2500 HD. This particular part is actually used in a large variety of GM models. The only tool you're going to need for this is a 10 millimeter socket and ratchet with an extension.
Here's the EGR valve and you're just going to want to remove these two 10 millimeter bolts on either side of it and we'll just fast forward as he removes those bolts. Just lift the EGR valve up and off and then lift the tab on the lead and pull it free.
Here is our old EGR valve and the new one from 1AAuto. Now, you just want to put that gasket down into place and put your EGR valve into place and you just want to replace those two 10 millimeter bolts. You can see he starts them off by hand and then he's going to use the socket to tighten the rest of the way. We'll just fast forward as he does that. Now you want to reconnect your lead.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EGR valve on this 1996 Chevy Tahoe with the 5.7-liter V8 engine. It's the same part and process on these Tahoes from 1996 to 2002. The items you'll need for this include a new EGR valve from 1AAuto.com and a 10mm socket and ratchet with an extension.
Your EGR valve is located right here. You want to just pry up on that tab and pull the harness free. Then remove these two 10mm bolts. We'll just fast-forward as Don does that. Now pull the EGR valve up and out.
There is a gasket here but if you have trouble removing it, just leave it on there. On the right is the old EGR valve; on the left is the new one from 1A Auto with a new gasket. You can see they're identical, and they'll fit exactly the same.
To keep your gasket from falling off, just use some small pieces of tape to tape it on there. Now lower your EGR valve down into place, and replace those two 10mm bolts and tighten them up. Then reconnect the harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
