Replaces
Frequently bought together
Part Details
Product Features
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the headlights on this 2005 Ford Excursion. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need for this includes new headlights from 1AAuto.com, a 7/32 socket, and a ratchet.
Start off by removing these four 7/32 screws. There are two up top, and there are two down here. It's kind of hard to see, but they're straight back. We'll just fast-forward as Don removes those four screws. Then I reach in behind the light, push the tab on the harness, and disconnect it. Now you can pull the headlight straight out. Just tilt it forward, push the tabs on either side of this harness, and disconnect it. Then push the tab underneath this harness and pull it free.
Now, to service your bulbs, for the main bulb, you just twist it counterclockwise and it pulls out. Then you twist your new one in clockwise. For this one, twist the socket out counterclockwise. The bulb pulls out, and you just push your new bulb straight in and twist the socket back in clockwise to lock it same thing with this smaller one.
On the left is the old headlight; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Connect your harnesses to your new headlight and push the headlight back into place. Now reach back and reconnect this harness. For these lower bolts, it helps to reach in through the wheel well here, and just hold them into place. Then tighten them with your socket and ratchet and an extension from the front. You do the same thing with the other lower bolt. We'll just fast-forward as Don tightens those up and then replaces the two up top and tightens those as well.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
