Drive End To Pulley 1st Groove Distance: 49.5 mm 1.97 in
Rotation Direction: Clockwise (Right)
Pulley Groove Quantity: 6
Brushless: No
Specification
Engine Displacement (Metric)
V8 5.4L
Product Features
Engineered to match exact vehicle specifications
Upgraded Service Life: Pressure-Fit High-Capacity Diodes for improved heat dissipation
Improved Reliability: Double insulated rotors and stators to reduce signal degradation
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Alternator 2004-08 Ford F150 Truck
Created on:
Tools used
A Piece of Pipe (for leverage)
Torque Wrench
1/2 Inch Ratchet
8mm Socket
10mm Socket
Ratchet
1. Disconnecting the Battery
Disconnect the negative battery cable with an 8mm socket and ratchet
2. Removing the Air Intake Hose
Loosen the two hose clamps on the air intake hose with a flat blade screwdriver
Disconnect the vacuum hose
Remove the air intake hose
3. Removing the Alternator
Insert the 1/2 inch drive ratchet into the tensioner
Turn the tensioner clockwise to loosen the belt
Pull the belt off the alternator
Release the tensioner
Remove the 10mm nut from the alternator wiring harness
Remove the four 10mm bolts from the alternator bracket
Disconnect the alternator wiring harness
Remove the alternator bracket
Loosen the two 10mm bolts from the bottom of the alternator
Lift the alternator up and out
4. Installing the New Alternator
Insert the alternator into place
Insert the bracket on top of the alternator
Tighten the four 10mm bolts to the bracket
Tighten the four 10mm bolts to 20 foot-pounds of torque
Connect the alternator wiring harness
Tighten the 10mm nut to the alternator wiring harness
Tighten the two 10mm bolts to the bottom of the alternator
Tighten the two 10mm bolts between 20 to 25 foot-pounds of torque
Pull the belt off the idler pulley
Pull the tensioner clockwise with the 3/8 inch ratchet
Pull the belt over the alternator
Pull the belt under the idler pulley
Release the tensioner
5. Reinstalling the Air Intake Hose
Insert the air intake hose in place
Tighten the two hose clamps with a flat blade screwdriver
Reconnect the vacuum hose
6. Reconnecting the Battery
Reconnect the negative battery cable
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the alternator on this 2005 Ford F150 with the 4.6-liter V8 engine. The items you'll need for this is a new alternator from 1AAuto.com, 1/2" ratchet, a piece of pipe for extra leverage, an 8mm and 10mm socket and ratchet, and a torque wrench.
You want to start off by disconnecting your battery. Just disconnect the negative battery cable, using an 8mm socket and ratchet. Pull the cable free.
Using your screwdriver, just loosen up the hose clamp here and right here. Then push the tab on this hose and pull it free. Then pull your air intake hose free.
Now, using your 1/2" ratchet, just push it into the tensioner. Using a piece of pipe for some extra leverage, just pull the ratchet or breaker bar back and then pull the belt off the alternator. Then carefully release the tension on the ratchet and pull it free. Lift up this harness from that stud and then remove this 10mm nut holding on this harness. Once you remove that nut the harness will pull free.
Now you want to remove these four 10mm bolts. We'll fast-forward as Mike does that. Now push the tab on this harness and disconnect it, and pull that bracket free. Now down here there's two more 10mm bolts holding in the alternator. You just need to loosen them up. We'll fast-forward as Mike loosens those up. Once they're loosened up you can just lift your alternator up and out.
Take your new alternator and feed it down into place. Since our original alternator was working fine we're just reinstalling it. Then you can reconnect the harness and replace that bracket. Then replace those four 10mm bolts and tighten them up. Torque each of those 10mm bolts to 20 foot-pounds. Replace that 10mm nut that holds this harness in place and tighten it up. On this nut you'll see I have a torque wrench in my hand. You don't have to torque this nut. You just want to tighten it up firm but not too tight. Then push that cover back down.
Now tighten up those two lower 10mm bolts. You'll want to torque these to 20 to 25 foot-pounds as well. Take my pipe, pull as far as I can on the tensioner and I should be able to lift the belt up. I'm going to try and take it off of this idler pulley, get it up onto the alternator, pull my tensioner and then push the belt down. You can see the idler pulley is the last one. Push it right down under.
Replace your air intake hose, reconnect this hose, and then tighten up those two hose clamps.
Push your negative battery cable back into place and just tighten it back up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
ALA94449
In Stock
Product Reviews
Loading reviews
3.60/ 5.010
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
0
0
3
Great parts, great site.
Ben
April 2, 2022
Super easy to replace. Video was exact match to my vehicle.
Bad Alternator
Mic
June 14, 2022
It was shorted out, overcharging
Juan
June 15, 2022
It was easy to replace just alittle bit of a pain
Mayolo
June 28, 2022
Just the right part for my vehicle.
And fast shipping
Not very good
Tyler
September 26, 2022
alternator is overcharging my battery giving me a fault code. i cant get anyone to contact me back on a replacement so i bought a reman oem alternator off of ebay.
Always there for me!
Alan
December 10, 2022
1-A always has the right part for the right time. But the most important feature I love about 1A Auto is the installation videos that help you install. I would mot be able to fix my cars without these tutorials. Thank you. I have saved a ton of.money repairing my own vehicles.
Easy!!
Kelly
August 14, 2023
Quick shipping..
Easy to install.,
Perfect transaction.
Avoid
Tyson
March 16, 2024
Failed immediately. Can not recommend this product avoid at all costs.
Gret product and service
P.B.
November 14, 2024
Part fit and worked well
Free shipping a big plus for shopping 1A Auto
F150 Alternator.
Victor
December 17, 2024
Works like it should. Perfect fitment.
Customer Q&A
Is TRQALA94449 a new alternator or reman ?December 16, 2024
Joe P
10
New, I believe.
December 16, 2024
Charlie R
10
Yes its new and well built throws out more amps than the original very pleased with this alt
December 17, 2024
Duane R
10
Yes. This alternator is new and not a reman
December 17, 2024
Victor W
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.