Replaces
Frequently bought together
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to be showing you how to replace the front grille on this 2002 Ford Focus, the same as any 2000-2004. Tools you'll need are a flat blade screwdriver and a 10 millimeter socket with a ratchet and extension.
Start by using a flat blade screwdriver. There are four little retaining clips. You just pry up the middle part of the retaining clip and then you can pull the whole thing right out. Again, there are four of them. Once you've pulled those clips out, then you pull that air intake up a little bit and pull the plastic trim shield off.
Now, you want to remove the grill by removing four bolts: one, two, three, and four. We'll fast forward through this. I'm using a 10 millimeter socket with a ratchet and an extension to remove those bolts. Now, the grill comes off and you can twist these sockets counterclockwise or just unplug them. Now, what you'll want to do is there's two 10 millimeter nuts on the back, here, undo those. Your Ford emblem comes off and you can transfer it onto the new grill.
Reinstall the grill. If you're looking to change these parking lights, they just pull out of the sockets and back in. Go into the sockets and then turn clockwise. Make sure you get them all the way into the sockets first. Grill back in place. Start your bolts. Fast forward as I tighten up these bolts. You want to tighten them up snug. They don't have to be extremely tight because you are putting the bolts into plastic, so you don't want to strip it. Now, your plastic trim goes in. Make sure it goes in. These tabs go under the grill. These pins, push in and push that down. Then, you reinstall the rest of the clips or pins and you should be all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
