Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a power window switch on this 2004 Ford Crown Victoria. We show you on the passenger side, but both rear doors are a similar procedure. The only items you'll need include a new power window switch from 1AAuto.com and a flat blade screwdriver.
Using a flat blade screwdriver, just pry up this switch panel and pull straight up to release that last clip. Then push the tab on both of these harnesses and pull them free.
Now pry up the tabs on the back of the switch. There's two on one side and one on the other. Once you've pried them each out the switch will pull right out.
On the left is the old switch; on the right is the new one from 1A Auto. You can see they're identical, and they're going to mount exactly the same. Take your new one and push it into place. Reconnect your harnesses and then push the back end of the panel in first, and then push the front then and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
