Replaces
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tailgate handle on this 2005 Ford F150. It's the same part and similar process on these F150s from 2005 to 2013. The items you'll need for this is a new tailgate handle from 1AAuto.com, 10mm socket and ratchet, T30 torx bit or driver, and a flat blade screwdriver.
Start off by removing these eight T30s and depending on your bed liner, you may be able to only access six of them at first. Once you remove those six and pull your bed liner away, you can then remove the two underneath it. Flip this panel out of the way and then remove this 10mm nut and this 10mm nut. We'll fast forward as Mike does that. Now just lift up on the latch and pull the handle studs out of there and then just maneuver the handle until you pull that top part down and out. Pull out this clip and lift your lock cylinder out.
On the left is the old tailgate handle. On the right is the chrome one from 1AAuto.com and it will fit exactly the same. Push your lock cylinder into the tailgate handle and feed the tailgate handle up into the door, lifting the latch up. Once you get the handle up and in, push the latch down onto the studs and replace those two 10mm nuts. Then just tighten those, checking every once in a while that it's staying lined up. Now just test it out. Make sure that it locks and unlocks. Then you can remove this plastic.
Take this panel, put it back into place and line it up and then replace the bolts to hold it in place. Then replace your bed liner and the bolts that go through that into this panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tailgate handle on this 2005 Ford F150. It's the same part and similar process on these F150s from 2005 to 2013. The items you'll need for this is a new tailgate handle from 1AAuto.com, 10mm socket and ratchet, T30 torx bit or driver, and a flat blade screwdriver.
Start off by removing these eight T30s and depending on your bed liner, you may be able to only access six of them at first. Once you remove those six and pull your bed liner away, you can then remove the two underneath it. Flip this panel out of the way and then remove this 10mm nut and this 10mm nut. We'll fast forward as Mike does that. Now just lift up on the latch and pull the handle studs out of there and then just maneuver the handle until you pull that top part down and out. Pull out this clip and lift your lock cylinder out.
On the left is the old tailgate handle. On the right is the new one from 1A Auto. You can see they're identical and they will fit exactly the same Take you lock cylinder and push it into your new tailgate handle and feed the tailgate handle up in place. Push those studs through the holes and just lower that latch down on to the studs and then replace those two 10mms. Now, just tighten those preliminarily. Then, make sure the tailgate handle is lined up properly and then tighten those two 10mm nuts up the rest of the way. Now just test it out. Make sure that it locks and unlocks. It works
Take this panel, put it back into place and line it up and then replace the bolts to hold it in place. Then replace your bed liner and the bolts that go through that into this panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
