Heavy Duty - Built to the strictest quality control standards
Direct Fit - No modifications for easy install
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Troubleshooting Tips for Your New Window Regulator
How to Replace Window Regulator 1993-1997 Ford Ranger
How to Replace Front Window Regulator 1998-2011 Ford Ranger
Created on:
Tools used
No Tools Needed
1. Adjusting the Window Regulator
Lay the old regulator and the new one side by side
Pick the new regulator up by the motor side
Flip the new regulator arms around to match your old regulator
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hey, I'm Brian, I'm here to give you guys a little tutorial on some window regulators. The specific design is the scissor design. We actually get a lot of calls on these products here and the common question is: The part I received seems different than the part in my vehicle.
The scissor design actually has a flip design and we're actually going to show you how to fix this here. The most common thing that you want to do, or the first step you want to do is lay the parts out side by side. Try not to match them up in the car because this can get confusing. Take it out, lay them side by side, and what you actually see here is a same exact part for the same model vehicle in the same door. As the appearance shows here, they seem to be mirrored.
If you look down at the bottom here, we have the power window motor. This is the piece that is actually powered to lift and lower your glass. The next section down here is . you actually have your gear drive. Here's your mounting plates on both. As you can see, it's identical. You have your tension spring here. If you notice on the upper section here, it's kind of reversed. You're going to think normally, I get the wrong side door. You're going to give us a call and you want to express that to one of our customer service reps. I'm going to show you how to fix this.
Basically, pick this up by the base and you want to scissor or flip. This is how you're going to fix the issue. It's going to actually match the component as shown there. You can now see that both of these components here are the same part and you're ready for installation.
You should be good to go. Click on Subscribe or check us out at 1AAuto.com. We'd be more than happy to have you join on board and join the 1AAuto team.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Bearing Grease
Flat Blade Screwdriver
Rivet Gun & Rivets
Phillips Head Screwdriver
Trim Tool Set
Tools used
Cutoff Wheel
Hammer
Rivet Gun & Rivets
Phillips Head Screwdriver
Pry Bar
Center Punch
Painter's Tape
Pocket Screwdriver
11mm Socket
Pick
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Reasonable price, straightforward install
James
July 17, 2017
I bought this regulator for my 2008 Ford Ranger. I have never attempted an internal door repair before. I watched a video and decided to try since shop repair cost is high on this stuff. The hardest part is getting the rivets out. I reinstalled with 1/4"-20 bolts rather than rivets since I couldn't find a rivet gun that large. They seem to work ok. Use caution when handling this part because the edges are really sharp. The part is die-cut and sharp edges are left. You may want to use a close-fitting glove or file the edges before installing. The part fit well and install went quickly after I got the old one out. The window works well with the new regulator.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Mazda is a registered trademark of Mazda Motor Corporation. 1A Auto is not affiliated with or sponsored by Mazda or Mazda Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.